A. Otani:Best Poster Presentation Award, JSAT-ATF2024, 2024/3/8.
M. Watanabe:Outstanding Presentation Award, 31st Conference on JSPE Student Member Graduation Research, 2024/3/12.
R. Kawakami:DMG MORI Award, 31st Conference on JSPE Student Member Graduation Research, 2024/3/12.
A. Otani:Kito-Award, Department of Mechanical Engineering, Keio University, 2024/3/25.
A. Otani:Outstanding Presentation Award for Graduation Research, Department of Mechanical Engineering, Keio University, 2024/3/25.
Y. Ueda:Award of the Director of Multidisciplinary and Design Science, Keio University, 2024/3/26.
Y. Yamamuro:Fumiko Yonezawa Award, Keio University, 2024/3/26.
S. Tanikawa:Young Researcher Award, JSPE, 2024/3/13.
L. Zhang, Y. Sato, Z. Yan: JSME Medal for Outstanding Paper, JSME , 2024/4/18.
2023
Y. Ueda：Young Researcher Award, JSME, 2022/12/2.
Y. Konishi：Best Poster Presentation Award, JSAT-ATF2023, 2023/3/9.
M. Wada：Poster Presentation Award, JSAT-ATF2023, 2023/3/9.
Y. Sato：Best Paper Award, IJEM, 2023/3/10.
L. Zhang：Best Paper Award, JSPE, 2023/3/15.
R. Niino：Best Presentation Award, CJUMP2023, 2023/10/24.
Ben Watkins：Best Paper Award, CJUMP2023, 2023/10/24
T. Hashimoto：Best Paper Award, CJUMP2023, 2023/10/24.
Y. Yamamuro：Women of the Future Awards, JSME, 2023/12/1.
J. Yan：Best Editor Award, IJEM, 2023/12.
2022
R. Niino：Poster Presentation Award, JSAT-ATF 2022, 2022/3/4.
N. Kasamo：Best Presentation Award, JSAT-ATF 2022, 2022/3/4.
M. Shimizu：Best Presentation Award, 29th Conference of JSPE Student Member Graduation Research, 2022/3/15.
Y. Ueda：Excellent Presentation Award, 29th Conference of JSPE Student Member Graduation Research, 2022/3/15.
Y. Sato：Best Paper Award, CJUMP2022, 2022/3/25-27.
A. Nakajima：Excellent Research Award (Master), School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 2022/3/28.
W. Huang：Fujiwara Award, Graduate School of Science and Technology, Keio University, 2022/3/28.
Y. Sato：Young Fellow Award, JSME, 2022/04/15.
K. Minami：Best Presentation Award, JSPE Spring Meeting, 2022/06/14.
N. Kasamo：Outstanding Presentation Award, PRESM2022, 2022/08/26.
D. Kitagawa：Outstanding Presentation Award, JSAT-ABTEC2022, 2022/10/28.
Y. Yamamuro：Young Researcher Award, ICPE2022, 2022/12/2.
2021
Y. Yamamuro：Excellent Research Award (Master), School of Integrated Design Engineering, Graduate School of Science and Technology, Keio University, 2021/3/26.
K. Enomoto：Excellent Presentation Award, 28th Conference on JSPE Student Member Graduation Research, 2021/3/29.
T. Terabayashi: Medal for Outstanding Paper, JSME, 2021/4/22.
S. Kasai: 42nd Machine Tool Technology Promotion Award for Outstanding Paper, Machine Tool Engineering Foundation, 2021/6.
K. Nagayama: 42nd Machine Tool Technology Promotion Award for Outstanding Paper, Machine Tool Engineering Foundation, 2021/6.
W. Huang：HEIDENHAIN Scholarship, euspen’s 21st International Conference, 2021/6/10
K. Minami： Outstanding Presentation Award, International Symposium on Precision Engineering and Sustainable Manufacturing, PRESM2021, 2021/7/23.
T. Meshram：Student Award, 2021 World Congress on Micro and Nano Manufacturing(WCMNM2021), 2021/9/23.
Y, Sato：Young Researcher Award, The 10th International Conference on Leading Edge Manufacturing in 21st Century(LEM21), 2021/11/18.
2020
Y. Sunaba: Best Paper Award, JSAT-ATF, 2020/2/28.
Y. Sato: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2020/3/23.
R. Teramachi: Miura Award, The Japan Society of Mechanical Engineering, 2020/3/26.
A. Nakajima： Best Paper Award, International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM) 2020, 2020/11/18.
2019
Y. Yamamuro: Poster Presentation Award, JSAT-ATF 2019, 2019/2/28.
R. Kishi: Best Presentation Award, JSAT-ATF 2019, 2019/2/28.
R. Kishi: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2019/2/28.
T. Okuuchi: Best Presentation Award, The 2019 JSPE Spring Conference, 2019/3/15.
N. Takayama: Miura Award, The Japan Society of Mechanical Engineering, 2019/3/28.
R. Kishi: 40th Machine Tool Technology Promotion Award for Encouragement, 2019/6/17.
SD.Gattu： Excellent presentations of Rank 3, 40th MATADOR International Conference on Advanced Manufacturing and Design, 2019/7/10.
Qian Yu：The 15th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2019), Excellent Paper Award, 2019/9/28.
Best Paper Award, 8th International Conference of ASPEN, 2019/11/14.
2018
S. Araki, H. Ishide, K. Nagayama: Excellent Presentation Award, 25th Conference of JSPE Student Member Graduation Research, 2018/3/15.
T. Suzuki: JSPE Takagi Award, 2018/3/16.
M. Heidari: JSPE Young Researcher Award, 2018/3/16.
J. Ishizuka: Mazak Foundation Best Paper Award, 2018/4/6.
K. Kousai: The 4th CIRP Conference on Surface Integrity (CIRP CSI 2018), Best Paper Award, 2018/7/13.
K. Nagayama: The 14th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2018), Best Paper Award and Young Researcher Award, 2018/9/15.
N. Takayama: International PhD Academic Forum on Intelligent Manufacturing (IPAFIM 2018), Best Presentation Award, 2018/10/26.
2017
T. Okuuchi: Poster Presentation Award, JSAT-ATF 2017, 2017/3/3.
N. Takayama: Best Presentation Award, JSAT-ATF 2017, 2017/3/3.
J. Ishizuka: Most Commendable Presentation Award, 24th Conference of JSPE Student Member Graduation Research, 2017/3/13.
Y. Imoto: Best Presentation Award, The 2017 JSPE Spring Conference, 2017/3/15.
N. Takayama: Fujiwara Award, Faculty of Science and Technology, Keio University, 2017/3/23.
N. Takayama: Keio Kougakukai Award, Keio University, 2014/3/22.
N. Takayama: Best Student Paper Presentation Award, World Congress on Micro and Nano Manufacturing (WCMNM2017), 2017/3/30.
T. Kurosawa: 38th Machine Tool Technology Promotion Award for Encouragement, 2017/6/19.
N. Takayama: Poster Presentation Award, The 2017 JSPE Autumn Meeting, 2017/9/22.
N. Takayama: The 9th International Conference on Leading Edge Manufacturing for 21st Century (LEM21), Best Presentation Award, 2017/11/16.
T. Terabayashi: The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Best Paper Award, 2017/11/22.
2016
Y. Shimamoto: Poster Session Award, JSAT-ATF 2016, 2016/3/4.
K. Kousai: Excellent Presentation Award, 23th Conference of JSPE Student Member Graduation Research, 2016/3/15.
T. Yamazaki: JSAT Excellent Presentation Award 2016, 2016/10/24.
T. Yamazaki: The 12th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2016), Young Researcher Award, 2016/11/06.
M. Mukaida, T. Okuuchi： The 17th International Machine Tool Engineers’ Conference, Excellent Poster Award, 2016/11/20.
2015
T. Yamazaki: Poster Session Award, JSAT-ATF 2015, 2015/3/6.
M. Mukaida: Excellent Presentation Award, 22th Conference of JSPE Student Member Graduation Research, 2015/3/17.
J. Noguchi: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2015/3/23.
M.Mukaida: 36th Machine Tool Technology Promotion Award for Encouragement, 2015/6/22.
Ahmad Rosli： The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Best Paper Award, 2015/10/20.
K. Okada: JSAT Excellent Presentation Award 2015, 2015/11/13.
M.Mukaida: The 11th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2015), Young Researcher Award, 2015/11/27.
2014
M. Matsumoto: Poster Session Award, JSAT-ATF 2014, 2014/3/7.
K. Okada: Poster Session Award, JSAT-ATF 2014, 2014/3/7.
K. Watanabe: Kito Award, Department of Mechanical Engineering, Keio University, 2014/3/22.
K. Niitsu: Excellent Graduation Research Award, Department of Mechanical Engineering, Keio University, 2014/3/22.
Y. Murata: Smart Processing Society Best Paper Award, 2014/05/19.
K. Watanabe: 35th Machine Tool Technology Promotion Award for Encouragement, 2014/6/23.
Y. Iwabuchi: The 15th International Conference on Precision Engineering (ICPE2014) Best Paper Award, 2014/7/24.
T. Kidokoro: JSAT Excellent Presentation Award 2014, 2014/10/24.
K. Watanabe: American Society for Precision Engineering (ASPE) Student Scholarship 2014, 2014/11/11.
K. Niitsu: JSME Manufacturing and Machine Tool Award for Outstanding Presentation, 2014/11/15.
List of Papers
2025年
No papers found.
2024
Weihai Huang, Toshiki Tsuchida, Jiwang Yan : Surface morphology formation and subsurface microstructure evolution of zirconia in ultrasonic vibration-assisted burnishing, Journal of Materials Processing Tech, 333,2024, 118586 -
F. Brüssel, W. Huang, J. Yan: Investigation of failure modes and material structural responses of nanographite coatings on single-crystal silicon by nanoscratching, Tribology International, 193(2024), 109349. -
J. Hong, H. Huang, L. Zhang, Z. Zhang, M. Jiang, J. Yan: Laser polishing and simultaneous hardening of the electrical discharge machined Zr-based metallic glass surface, Materials & Design, 237(2024), 112599. -
Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores, Journal of Alloys and Compounds, 980(2024), 173596. -
H. An, Y. Qian, L. Zhang, Z. Zhang, H. Huang, J. Yan: On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser, Composites Part A, 180(2024), 108082. -
H. An, H. Huang, P. Xu, B. Liu, H. An, Y. Qian, J. Yan: Surface quality and mechanical property evolution of laser nitrided Zr-based metallic glass induced by laser shock flattening, Vacuum, 224(2024), 113193. -
M. Wagih, MA. Hassan, H. El-Hofy, J. Yan and I. Maher: Effects of process parameters on cutting forces, material removal rate, and specific energy in trochoidal milling, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238, 7 (2024) 2745-2757. -
2023
T. Tsuchida, W. Huang, J. Yan: Surface conditioning of zirconia ceramic by enhanced ultrasonic vibration-assisted burnishing, Production Engineering, (2023), https://doi.org/10.1007/s11740-023-01242-2. -
W. Huang, J. Yan: Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation, Journal of Materials Processing Tech., 311 (2023) 117797. -
Y. Yamamuro, T. Shimoyama, J. Yan: Generation of nanopore structures in yttria-stabilized zirconia by femtosecond pulsed laser irradiation, Journal of Materials Research and Technology, 23 (2023), 1155-1176. -
T. Meshram, J. Yan: Formation of Laser-Induced Periodic Surface Structures on Reaction-Bonded Silicon Carbide by Femtosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology, (2023). -
K. Minami, K. Kobinata, J. Yan: Multilayer Graphene‐Coated Silicon Carbide Nanowire Formation Under Defocused Laser Irradiation, Nanomanufacturing and Metrology, (2023). -
C. Wang, H. Huang, H. Wu, J. Hong, L. Zhang, J. Yan: Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding, Surface & Coatings Technology, 474(2023), 130083. -
M. Cui, H. Huang, H. Wu, L. Zhang, J. Yan: Achieving superhydrophobicity of Zr-based metallic glass surface with anti-corrosion and anti-icing properties by nanosecond laser ablation and subsequent heat treatment, Surface & Coatings Technology, 475(2023), 130159. -
Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Femtosecond Pulsed Laser Irradiation of Zirconia for Embedding Silver Nanoparticles in Surface Nanopores, Applied sciences, 13(2023), 13108. -
X. Li, G. Zheng, J. Yan, X. Cheng, Y. Li and E. Cui: Tool wear and surface integrity in liquid nitrogen clean cutting of cobalt-based superalloy GH605 with AlTiN coated tools, WEAR, 530-531 (2023) 204962, https://doi.org/10.1016/j.wear.2023.204962. -
Y. He, T. Zhou, AS. Kumar, X. Wang and J. Yan: Study on the non-free plastic shear removal of material and cutting-induced deformation of micron-submicron grooves, Journal of Materials Processing Technology, 317 (2023) 117999, https://doi.org/10.1016/j.jmatprotec.2023.117999 -
M. Wagih, I. Maher, H. El-Hofy, J. Yan and MA. Hassan: Analysis and development of elliptical tool path in trochoidal milling, CIRP Journal of Manufacturing Science and Technology, 47 (2023) 168-183, https://doi.org/10.1016/j.cirpj.2023.10.002 -
L. Zhang, Y. Sato, J. Yan: Optimization of fast tool servo diamond turning for enhancing geometrical accuracy and surface quality of freeform optics, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.17, No.1, 2023. -
W. Huang, J. Yan: Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review, International Journal of Extreme Manufacturing, 5 (2023) 012003. -
C. He, J. Yan, S. Wang, S. Zhang, G. Chen, C. Ren: A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials, International Journal of Extreme Manufacturing, 5 (2023) 035102. -
D. Kitagawa, T. Meshram, J. Yan: Microgrooving of ferrous metals by using cBN tools with laser-modified edges, Journal of the Japan Society for Abrasive Technology, 67, 6 (2023) 341-346. -
S. Tanikawa, Y. Sato, J. Yan: A novel calibration method for angular misalignment in independently controlled fast tool servo-based diamond turning, Precision Engineering, 83 (2023), 216-227. -
W. Huang, J. Yan: Mechanisms of tool-workpiece interaction in ultraprecision diamond turning of single-crystal SiC for curved microstructures, International Journal of Machine Tools and Manufacture, 191 (2023), 104063. -
W. Huang, K. Nagayama, J. Yan: Fabrication of microlens arrays on single-crystal CaF2 by ultraprecision diamond turning, Journal of Materials Processing Tech., 321(2023), 118133. -
2022
S. Gattu, J. Yan: Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders, Micromachines, 13 (2022), 998. -
G. Esser, J. Yan: Direct Observation of Discharge Phenomena in Vibration-Assisted Micro EDM of Array Structures, Micromachines 2022, 13, 1286. -
A. Nakajima, J. Yan: Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses, International Journal of Precision Engineering and Manufacturing, (2022). -
K. Minami, K. Kobinata, J. Yan: Generation of Si@C/SiC@C core–shell nanoparticles by laser irradiation of silicon grinding waste, Nano Select, (2022). -
A. Nakajima, M. Omiya, J. Yan: Generation of micro/nano hybrid surface structures on copper by femtosecond pulsed laser irradiation, Nanomanufacturing and Metrology, (2022). -
M. Omiya, A. Nakajima, J. Yan: Design and fabrication of micro and nano surface structures for enhancing metal–polymer adhesion using femtosecond laser treatment, Materials & Design 224 (2022) 111349. -
L. Zhang, J. Yan: Study on nano-graphitic carbon coating on Si mold insert for precision glass molding, Surface & Coatings Technology 448 (2022) 128893. -
MM. Atef, W. Khair-Eldeen, J. Yan and MGA. Nassef: Investigating the Combined Effect of Multiple Dent and Bump Faults on the Vibrational Behavior of Ball Bearings, Machines, 10, 11 (2022) 1062, https://doi.org/10.3390/machines10111062 -
Y. Li, X. Cheng, G. Zheng, J. Yan, H. Liu and X. Li: Dynamic modeling and in-process parametric compensation for fabricating micro straight thin walls by micromilling, Journal of Materials Research and Technology, 18 (2022) 2480-2493, https://doi.org/10.1016/j.jmrt.2022.03.138 -
F. Fang, M. Lai, J. Wang, X. Luo, J. Yan and Y. Yan: Nanometric cutting: Mechanisms, practices and future perspectives, International Journal of Machine Tools and Manufacture, 178 (2022) 103905, https://doi.org/10.1016/j.ijmachtools.2022.103905 -
C. Axinte, H. Huang, J. Yan and Z. Liao: What micro-mechanical testing can reveal about machining processes, International Journal of Machine Tools and Manufacture, 183 (2022) 103964, https://doi.org/10.1016/j.ijmachtools.2022.103964 -
Z. Wu, G. Zheng, J. Yan, X. Cheng, H. Liu and X. Yang: Effect of TiAlSiN coating residual stress on its sliding wear and cutting wear performance, International Journal of Advanced Manufacturing Technology, 123, 11-12 (2022) 3885-3900, https://doi.org/10.1007/s00170-022-10508-5 -
S. Tanikawa, J. Yan: Fabrication of micro-structured surface with controllable randomness by using FTS-based diamond turning, Precision Engineering, 73 (2022), 363–376. -
L. Zhang, J. Yan: Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding, Precision Engineering, 74 (2022) 186–194. -
Y. Sato, J. Yan: Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo, International Journal of Extreme Manufacturing, 4 (2022), 025102. -
Y. Ueda, N. Sakurai, T. Takagi, K. Ishizu, J. Yan: Exploratory investigation of chip formation and surface integrity in ultrahigh-speed gear hobbing, CIRP Annals – Manufacturing Technology, 71 (2022), 89-92. -
2021
L. Zhang, J. Yan: Evolution of high-pressure metastable phase Si-XIII during silicon nanoindentation: A molecular dynamics study, Computational Materials Science, 191 (2021), 110344. -
W. Huang, J. Yan: Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter, Precision Engineering, 72 (2021), 717–729. -
Y. Yamamuro, T. Shimoyama, J. Yan: Microscale Surface Patterning of Zirconia by Femtosecond Pulsed Laser Irradiation, International Journal of Precision Engineering and Manufacturing-Green Technology, (2021). -
Q. Yu, T. Zhou, Y. He, P. Liu, X. Wang and J. Yan: Effects of relative tool sharpness on surface generation mechanism of precision turning of electroless nickel-phosphorus coating, Journal of Mechanical Science and Technology, 35, 7 (2021) 3113-3121, https://doi.org/10.1007/s12206-021-0633-x -
P. Qiu, B. Meng, S. Xu, Y. Rong and J. Yan: Evolution and control of deformation mechanisms in micro-grooving of Zr-based metallic glass, Journal of Manufacturing Processes, 68 (2021) 923-931, https://doi.org/10.1016/j.jmapro.2021.06.012 -
W. Huang, J. Yan: Chip-free surface patterning of toxic brittle polycrystalline materials through micro/nanoscale burnishing, International Journal of Machine Tools and Manufacture, 162 (2021), 103688. -
K. Nagayama, J. Yan: Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy, Journal of Manufacturing Processes, 64 (2021), 45-57. -
W. Huang, J. Yan: Fundamental Investigation of Diamond Cutting of Micro V-Shaped Grooves on a Polycrystalline Soft-Brittle Material, Journal of Manufacturing and Materials Processing. 2021, 5, 17. https://doi.org/10.3390/jmmp5010017. -
L. Zhang, T. Hashimoto, J. Yan: Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning, CIRP Annals – Manufacturing Technology. 70 (2021) 37-40. -
Y. Kamada, J. Yan: Machinability Investigation for Cellulose Nanofiber-Reinforced Polymer Composite by Ultraprecision Diamond Turning, International Journal of Automation Technology. Vol.15 No.4, 2021. -
W. Huang, J. Yan: Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter, Precision Engineering, 72 (2021), 717–729. -
2020
E. Brinksmeier, B. Karpuschewski, J. Yan: Manufacturing of multiscale structured surfaces, CIRP Annals – Manufacturing Technology, 69 (2020), 717-739. -
K. Momoki, J. Yan: Nanoparticle generation from various types of silicon materials by nanosecond-pulsed laser irradiation, Applied Physics Express, 13 (2020), 026505. -
K. Momoki, T. Manabe, L. Li, J. Yan: Silicon nanoparticle generation and deposition on glass from waste silicon powder by nanosecond pulsed laser irradiation, Materials Science in Semiconductor Processing, 111 (2020), 104998. -
K. Momoki, K. Takahashi, K. Kobinata, Y. Kobayashi, A. Kawai, J. Yan: Generating Silicon Nanofiber Clusters from Grinding Sludge by Millisecond Pulsed Laser Irradiation, Nanomaterials, Vol.812 No.10, 2020. -
K. Kosai, J. Yan: Effects of cyclic loading on subsurface microstructural changes of zirconia polycrystals in nanoscale mechanical processing, International Journal of Machine Tools and Manufacture, 159 (2020), 103626. -
R. Kishi, J. Yan: Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010906. -
T. Shitara, K. Fujita, J. Yan: Direct observation of discharging phenomena in vibration-assisted micro-electrical discharge machining, The International Journal of Advanced Manufacturing Technology, 108 (2020), 1125-1138. -
K. Niitsu, J. Yan: Effects of deep subsurface damages on surface nanostructure formation in laser recovery of grinded single-crystal silicon wafers, Precision Engineering, 62 (2020), 213-222. -
K. Momoki, J. Yan: Nanoparticle generation from various types of silicon materials by nanosecond-pulsed laser irradiation, Applied Physics Express, 13 (2020), 026505. -
Y. Yamamuro, T. Shimoyama, I. Yamashita, J. Yan: Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010907. -
K. Momoki, T. Manabe, L. Li, J. Yan: Silicon nanoparticle generation and deposition on glass from waste silicon powder by nanosecond pulsed laser irradiation, Materials Science in Semiconductor Processing, 111 (2020), 104998. -
X. Zhang, Y. Chueh, C. Wei, Z. Sun, J. Yan, L. Li: Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing, Additive Manufacturing, 33 (2020), 101113. -
K. Momoki, K. Takahashi, K. Kobinata, Y. Kobayashi, A. Kawai, J. Yan: Generating Silicon Nanofiber Clusters from Grinding Sludge by Millisecond Pulsed Laser Irradiation, Nanomaterials, Vol.10 No.812, 2020. -
T. Kobayashi, J.Yan: Generating Nanodot Structures on Stainless-Steel Surface by Cross Scanning of a Picosecond Pulsed Laser, Nanomanufacturing and Metrology, (2020), https://doi.org/10.1007/s41871-020-00063-6. -
T. Meshram, J. Yan: Generation of microcones on reaction-bonded silicon carbide by nanosecond pulsed laser irradiation, The Inaternational Journal of Advanced Manufacturing Technology, 108 (2020), 1039-1048. -
H. Huang, Y. Qian, C. Wang, J. Yan: Laser induced micro-cracking of Zr-based metallic glass using 1011 w/m2 nano-pulses, Materials Today Communications, 25 (2020), 101554. -
A. Teramachi, S. Tarvainen, J. Yan: Drilling of cemented carbide by ultrasonic vibration-assisted grinding on a flexible stage, Journal of the Japan Society for Abrasive Technology, 64, 6 (2020) 320-325. -
Y. He, T. Zhou, X. Dong, P. Liu, W. Zhao, X. Wang, Y. Hu and J. Yan: Generation of high-saturation two-level iridescent structures by vibration-assisted fly cutting, Materials & Design, 193 (2020) 108839, https://doi.org/10.1016/j.matdes.2020.108839 -
S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: A molecular dynamics approach, Materials Science in Semiconductor Processing, 108 (2020) 104868. -
S. N. Ameli Kalkhoran, M. Vahdati, Z. Zhang, J. Yan: Influence of Wax Lubrication on Cutting Performance of Single‑Crystal Silicon in Ultraprecision Microgrooving : International Journal of Precision and Manufacturing-Green Technology, 8, 2 (2021), 611-624, https://doi.org/10.1007/s40684-020-00198-3. -
T. Terabayashi, J. Yan: Surface Formation Behaviors in Wavy Microgroove Cutting on Various Workpiece Materials, International Journal of Automation Technology, Vol.14 No.2, 2020. -
W. Huang, J. Yan: Surface Formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe, International Journal of Machine Tools & Manufacture, 153 (2020), 103554. -
K. Nagayama, J. Yan: Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces, Int. J. of Automation Technology, 14, 4 (2020) 654-664. -
T. Zhou, Y. He, T. Wang, X. Dong, P. Liu, W.Zhao, Y. Hu, J. Yan: Algorithm of Micro-Grooving and Imaging Processing for the Generation of High-Resolution Structural Color Images, Nanomanufacturing and Metrology, 3, 3 (2020), 187-198, https://doi.org/10.1007/s41871-020-00068-1. -
2019
X. Yang, N. Tachikawa, Y. Katayama, L. Lin, J. Yan: Effect of the Pillar Size on the Electrochemical Performance of Laser-Induced Silicon Micropillars as Anodes for Lithium-Ion Batteries, Appl. Sci. 2019, 9, 3623. -
K. Kosai, J. Yan: Direct observations of multi-cyclic nanoindentation-induced phase transformations in single-crystal Ge, Materials Research Express, 6 (2019), 075065. -
T. Kurosawa, J. Yan: Electrical Discharge Machining and Grinding of SiC Single Crystal Using a Disc-type Hybrid Tool of Polycrystalline Diamond, Journal of the Japan Society of Electrial-machining Engineers Vol.53, (2019), No.132, 12-18. -
S. Kasai, T. Sodetai J. Yan: Fabrication of polycrystalline diamond three-dimensional structures by sinking EDM using carbon diffusion reaction, Journal of the Japan Society of Electrial-machining Engineers Vol.53, (2019), No.132, 5-11. -
H. Huang, M. Jiang, J. Yan: The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass, Journal of Alloys and Compounds, 770 (2019), 864-874. -
K. Niitsu, Y. Tayama, T. Kato, J. Yan: Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer, Surface Topography: Metrology and Properties, 7 (2019). -
T. Kobayashi, T. Wakabayashi, Y. Takushima, J. Yan: Formation behavior of laser-induced periodic surface structures on stainless tool steel in various media, Precision Engineering, 57 (2019), 244-252. -
X. Yang, N. Tachikawa, Y. Katayama, L. Lin, J. Yan: Effect of the Pillar Size on the Electrochemical Performance of Laser-Induced Silicon Micropillars as Anodes for Lithium-Ion Batteries, Appl. Sci. 2019, 9, 3623. -
A. Teramachi, J. Yan: Improving the Surface Integrity of Additive-Manufactured Metal Parts by Ultrasonic Vibration-Assisted Burnishing, Journal of Micro- and Nano-Manufacturing, JUNE 2019, Vol. 7, 024501. -
H. Ishide, J. Yan: Study on Infrared Transmittance of Si-Polymer Hybrid Structure Press Molded Using a Coupling Agent, Journal of Automation Technology Vol.13, (2019), No.6, 817-824. -
P. Beiring, J. Yan: Ultrasonic vibration-assisted microgrinding of glassy carbon, Journal of Mechanical Engineering Science, Vol. 233(12) (2019), 4165-4175. -
Z. He, J. Li, Y. Liu, J. Yan: Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel, International Journal of Advanced Manufacturing Technology, 101, 5–8 (2019) 1821–1835. -
Z. He, J. Li, Y. Liu, J. Yan: Single-grain cutting based modeling of abrasive belt wear in cylindrical grinding, Friction, (2019) 1-13. -
Y. El-Taybany, M. Hossam, J. Yan, H. El-Hofy: Surface roughness in ultrasonic-assisted and conventional milling of soda-lime glass, International Journal of Machining and Machinability of Materials, 21, 1/2 (2019) 82 – 99. -
Y. El-Taybany, M. Hossam, J. Yan and H. El-Hofy: Surface roughness in ultrasonic-assisted and conventional milling of soda-lime glass, International Journal of Machining and Machinability of Materials, 21, 1-2 (2019) 82-99, https://doi.org/10.1504/ijmmm.2019.098068 -
Z. Zhang, J. Yan, T. Kuriyagawa: Manufacturing technologies toward extreme precision, International Journal of Extreme Manufacturing, 1 (2019) 022001. -
M. Heidari, J. Akbari, J. Yan: Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon, Journal of Manufacturing Processes, 37 (2019), 321-331. -
T. Terabayashi, J. Yan: Ultra-precision cutting of roll molds having two-directional wavy microstructures, The Japan Society of Mechanical Engineers, Vol.85, No.874 (2019). -
J. Yan, T. Okuuchi: Chip morphology and surface integrity in ultrasonic cutting of yttria-stabilized tetragonal zirconia polycrystal, CIRP Annals – Manufacturing Technology, 68(2019) 53-56. -
S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Molecular dynamics investigation of nanometric cutting of single-crystal silicon using a blunt tool, JOM(2019). https://doi.org/10.1007/s11837-019-03671-w. -
2018
Q. Wang, F. Zhou, Q. Ma, M. Callisti, T. Polcar, J. Yan: Fracture toughness and sliding properties of magnetron sputtered CrBC and CrBCN coatings, Applied Surface Science, 443 (2018), 635–643. -
H. Huang, J. Yan: Multi-scale dimple creation on metallic glass by a two-step method involving nanoindentation and polishing, Applied Surface Science, 462 (2018), 565–574. -
K. Niitsu, Y. Tayama, T. Kato, H. Maehara, J. Yan: Characterization of recrystallized depth and dopant distribution in laser recovery of grinding damage in single-crystal silicon, Materials Science in Semiconductor Processing, 82 (2018), 54–61. -
N. Takayama, S. Asaka, J. Yan: Nanosecond pulsed laser irradiation of sapphire for developing microstructures with deep V-shaped grooves, Precision Engineering, 52 (2018), 440–450. -
N. Takayama, J. Ishizuka, J. Yan: Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests, Precision Engineering, 53 (2018), 252–262. -
T. Kobayashi, H. Sera, T. Wakabayashi, H. Endo, Y. Takushima, J. Yan: Surface Flattening and Nanostructuring of Steel by Picosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology, (2018). -
J. Yan, Y. Imoto: Nanoscale surface patterning of diamond utilizing carbon diffusion reaction with a microstructured titanium mold, CIRP Annals – Manufacturing Technology, 67 (2018), 181–184. -
H. Huang, J. Yan: Multi-scale dimple creation on metallic glass by a two-step method involving nanoindentation and polishing, Applied Surface Science, 462 (2018), 565–574. -
T. Suzuki, T. Otsuki, J. Yan: Precision slicing of single-crystal SiC using extremely fine fixed-abrasive diamond wire, Bulletin of the JSME, 84, 857 (2018). -
X. Li, Z. Zhang, H. Hu, Y. Li, L. Xiong, X. Zhang and J. Yan: Noncontact on-machine measurement system based on capacitive displacement sensors for single-point diamond turning, Optical Engineering, 57, 4 (2018) 044105, https://doi.org/10.1117/1.OE.57.4.044105 -
M. Heidari, J. Yan: Nanometer-scale chip formation and surface integrity of pure titanium in diamond turning, International Journal of Advanced Manufacturing Technology, 95 (2018), 479-492. -
R. Komiya, T. Kimura, T. Nomura, M. Kubo, J. Yan: Ultraprecision cutting of single-crystal calcium fluoride for fabricating micro flow cells, Journal of Advanced Mechanical Design,Systems,and Manufacturing, 12, 1 (2018). -
M. Heidari, J. Yan: Material removal mechanism and surface integrity in ultraprecision cutting of porous titanium, Precision Engineering, 52 (2018), 356–369. -
J. Ishizuka, K. Nagasawa, M. Mikami, J. Yan: Ultraprecision cutting of fluoride glass – Fundamental investigation on surface formation and tool damage -, Journal of the Japan Society for Abrasive Technology, 62, 2 (2018) 88-93. -
2017
J. Wang, L.Wan, J. Chen, J. Yan: Micropatterning of diamond crystallites via cobalt-catalyzed thermochemical etching, Journal of Material Science, 52 (2017) 709-720. -
Y. Imoto, J. Yan: Thermochemical micro imprinting of single-crystal diamond surface using a nickel mold under high-pressure conditions, Applied Surface Science, 404 (2017) 318-325. -
J. Yan, J. Noguchi, Y. Terashi,: Fabrication of single-crystal silicon micro pillars on copper foils by nanosecond pulsed laser irradiation, CIRP Annals – Manufacturing Technology, 66 (2017) 253-256. -
M. Matsumoto, H. Huang, H.Harada, K.Kakimoto and J. Yan: On the phase transformation of single-crystal 4H–SiC during nanoindentation, Journal of Physics D: Applied Physics , 50 (2017) 265303. -
H. Huang, J. Yan: Investigating shear band interaction in metallic glasses by adjacent nanoindentation, Materials Science & Engineering A, 704(2017), 375-385. -
K. Kosai, H. Huang, J. Yan: Comparative Study of Phase Transformation in Single-Crystal Germanium during Single and Cyclic Nanoindentation, Crystals, 7 (2017), 333. -
T. Tan, J. Yan: Atomic-scale characterization of subsurface damage and structural changes of single-crystal silicon carbide subjected to electrical discharge machining, Acta Materialia, 123 (2017) 362-372. -
N. Takayama, J. Yan: Mechanisms of micro-groove formation on single-crystal diamond by a nanosecond pulsed laser, Journal of Materials Processing Technology, 243 (2017) 299-311. -
H. Huang and J. Yan: Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas, Journal of Micromechanics and Microengineering , 27 (2017) 075007. -
J. Yan, J. Noguchi, Y. Terashi,: Fabrication of single-crystal silicon micro pillars on copper foils by nanosecond pulsed laser irradiation, CIRP Annals – Manufacturing Technology, 66 (2017) 253-256. -
N. Takayama, J. Yan: Laser Irradiation Responses of a Single-Crystal Diamond Produced by Different Crystal Growth Methods, Applied Sciences, 7(8), 815 (2017). -
A. R. Abdul Manaf, J. Yan: Improvement of form accuracy and surface integrity of Si-HDPE hybrid micro-lens arrays in press molding, Precision Engineering, 47 (2017) 469-479. -
Y. Imoto, J. Yan: Thermochemical micro imprinting of single-crystal diamond surface using a nickel mold under high-pressure conditions, Applied Surface Science, 404 (2017) 318-325. -
A. R. Abdul Manaf, T. Sugiyama, J. Yan: Design and fabrication of Si-HDPE hybrid Fresnel lenses for infrared imaging systems, Optics Express, 25 (2017) 1202. -
Y. Imoto, J. Yan: Fabrication of Microstructures on Single-crystal Diamond by Press Imprinting Utilizing Pure Iron Molds, Journal of the Japan Society for Precision Engineering, 83, 8 (2017) 770-774. -
T. Suzuki, Y. Nishino, J. Yan: Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon, Precision Engineering, 50(2017), 32-43. -
T. Suzuki, Y. Nishino and J. Yan: Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon, Precision Engineering, 50 (2017) 32-43, https://doi.org/10.1016/j.precisioneng.2017.04.011 -
M. Mukaida and J. Yan: Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo, International Journal of Machine Tools & Manufacture, 115 (2017) 2-14. -
M. Heidari and J. Yan: Fundamental characteristics of material removal and surface formation in diamond turning of porous carbon, International Journal of Additive and Subtractive Materials Manufacturing, 1 (2017) 23-41. -
M. Heidari and J. Yan: Ultraprecision surface flattening of porous silicon by diamond turning, Precision Engineering, 49 (2017) 262-277. -
P. J. Liew, A. Shaaroni, N. A. C. Sidik, J. Yan: An overview of current status of cutting fluids and cooling techniques of turning hard steel, International Journal of Heat and Mass Transfer, 114 (2017) 380-394. -
M. Mukaida, J. Yan: Fabrication of Hexagonal Microlens Arrays on Single-Crystal Silicon Using the Tool-Servo Driven Segment Turning Method, Micromachines, 8 (2017), 323. -
2016
J. Wang, L. Wan, J. Chen, J. Yan: Surface patterning of synthetic diamond crystallites using nickel powder, Diamond & Related Materials, 66 (2016) 206-212. -
J. Yan, K. Okada: Fabrication of silicon-based porous nanocomposite films by focused infrared light sintering, CIRP Annals-Manufacturing Technology, 65 (2016) 217-220. -
H. Huang, J. Yan: In situ characterization of formation and growth of high-pressure phases in single-crystal silicon during nanoindentation, Applied Physics A – Material Science & Processing, 122, 409 (2016) 1-7. -
H. Huang, J. Zhang, C. Shek, J. Yan: Effects of pre-compression deformation on nanoindentation response of Zr65Cu15Al10Ni10 bulk metallic glass, Journal of Alloys and Compounds, 674 (2016) 223-228. -
Q. Wang, F. Zhou, J. Yan: Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests, Surface and Coatings Technology, 285 (2016) 203-213. -
H. Huang, J. Yan: Volumetric and timescale analysis of phase transformation in single-crystal silicon during nanoidentation, Applied Physics A, 122, 607 (2016) 1-11. -
W. Wang, P. Yao, J. Wang, C. Huang, H. Zhu, B. Zou, H. Liu, J. Yan: Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions, International Journal of Machine Tools and Manufacture, 109 (2016) 126-136. -
H. Huang, J. Yan: Microstructural changes of Zr-based metallic glass during micro-electrical discharge machining and grinding by a sintered diamond tool, Journal of Alloys and Compounds, 688 (2016) 14-21. -
J. Yan, K. Okada: Fabrication of silicon-based porous nanocomposite films by focused infrared light sintering, CIRP Annals-Manufacturing Technology, 65 (2016) 217-220. -
H. Huang, J. Noguchi, M. Jiang, R. Moriya, J. Yan: Nanosecond pulsed laser irradiation induced hierarchical micro/nanostructures on Zr-based metallic glass substrate, Materials & Design, 109 (2016) 153-161. -
H. Huang, J. Noguchi, J. Yan: Shield gas induced cracks during nanosecond-pulsed laser irradiation of Zr-based metallic glass, Applied Physics A, 122, 10 (2016) 881. -
A. R. Abdul Manaf, J. Yan: Press Molding of a Si-HDPE Hybrid Lens Substrate and Evaluation of Its Infrared Optical Properties, Precision Engineering, 43 (2016) 429-438. -
W. Wang, P. Yao, J. Wang, C. Huang, H. Zhu, B. Zou, H. Liu, J. Yan: Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions, International Journal of Machine Tools and Manufacture, 109 (2016) 126-136. -
T. Yamasaki, J. Yan: High-precision micro-grooving of CFRP by ultrasonic vibration-assisted grinding, Journal of the Japan Society for Abrasive Technology，60, 12 (2016) 659-664. -
T. Suzuki, T. Otsuki, J. Yan: Precision slicing of single-crystal silicon using a dicing wire saw, Journal of the Japan Society for Abrasive Technology, 60, 2 (2016) 97-103. -
C. Liu, J. Yan, and S. Lin: Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings, Optical Engineering, 55(6) (2016) 064105. -
2015
Q. Wang, F. Zhou, C. Wang, M. Yuen, M. Wang, T. Qian, M. Matsumoto, J. Yan: Comparison of tribological and electrochemical properties of TiN CrN TiAlN and a-C H coatings in simulated body fluid, Materials Chemistry and Physics, 158 (2015) 74-81. -
Q. Wang, F. Zhou, S. Gao, Z. Zhou, L. Li, J. Yan: Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid, Surface & Coatings Technology, 265 (2015) 16-23. -
Q. Wang, F. Zhou, S. Gao, Z. Zhou, L. Li, J. Yan: Effect of counterparts on the tribological properties of TiCN coatings with low carbon concentration in water lubrication, Wear, 328-329 (2015) 356-362. -
J. Wang, L. Wan, J. Chen, J. Yan: Anisotoropy of synthetic diamond in catalytic etching using iron powder, Applied Surface Science, 346 (2015) 388-393 -
K. Asakura, J. Yan: Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves, International Journal of Automation Technology, 9 (2015) 396-402. -
T. Kidokoro, J. Yan: High-precisioin sintering for porous silicon-carbon composite thick films, Journal of the Japan Society for Abrasive Technology, 59, 1 (2015) 23-26. -
Y. Iwabuchi, J. Yan: Laser sintering of silicon powder and carbon nanofibers for porous composite thick films, Applied Physics Express, 8 (2015) 026501. -
H. Huang and J. Yan: New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation, Scripta Materialia, 102 (2015) 35-38. -
H. Huang, J. Yan: On the mechanism of secondary pop-out in cyclic nanoindentation of single-crystal silicon, Journal of Materials Research, 30, 11 (2015) 1861-1868. -
Q. Wang, Z. Wu, F. Zhou, H. Huang, K. Niitsu, J. Yan: Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation, Surface and Coatings Technology, 272 (2015) 239-245. -
Q. Wang, Z. Wu, F. Zhou, J. Yan: Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation, Materials Science and Engineering: A, 642 (2015) 391-397. -
H. Huang, J. Yan: Possibility for rapid generation of high-pressure phases in single-crystal silicon by fast nanoindentation, Semiconductor Science and Technology, 30 (2015) 115001. -
J. Yan, T. H. Tan: Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC, CIRP Annals – Manufacturing Technology, 64, 1 (2015). -
H. Huang, J. Yan: On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining, Applied Surface Science, 355 (2015) 1306-1315. -
Y. Iwabuchi, J. Yan: Laser sintering of silicon powder and carbon nanofibers for porous composite thick films, Applied Physics Express, 8 (2015) 026501. -
T. Zhou, J. Yan, Z. Liang, X. Wang, R. Kobayashi, T. Kuriyagawa: Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming, Precision Engineering, 39/ 1 (2015) 25-30. -
T. Kidokoro, J. Yan: High-precisioin sintering for porous silicon-carbon composite thick films, Journal of the Japan Society for Abrasive Technology, 59, 1 (2015) 23-26. -
J. Yan, T. H. Tan: Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC, CIRP Annals – Manufacturing Technology, 64, 1 (2015). -
T. Yamasaki, J. Yan: High-precision drilling of CFRP by ultrasonic vibration-assisted grinding，Journal of the Japan Society for Abrasive Technology，59, 12 (2015) 699-704. -
S. Azami, H. Kudo, Y. Mizumoto, T. Tanabe, J. Yan and Y. Kakinuma: Experimental study of crystal anisotropy based on ultra-precision cylindrical turning of single-crystal calcium fluoride, Precision Engineering, 40, 172-181 (2015), https://doi.org/10.1016/j.precisioneng.2014.11.007. -
K. Asakura, J. Yan: Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves, International Journal of Automation Technology, 9 (2015) 396-402. -
2014
Q. Wang, F. Zhou, Z. Zhou, L. Li, J. Yan: Electrochemical performance of TiCN coatings with low carbon concentration in simulated body fluid, Surface & Coatings Technology, 253 (2014) 199-204. -
S. Goel, J. Yan, X. Luo, A. Agrawal: Incipient plasticity in 4H-SiC during quasistatic nanoindentation, Journal of the Mechanical Behavior of Biomedical Materials, 34 (2014) 330-337. -
S. Goel, N. Faisal, X. Luo, J. Yan, A. Agrawal: Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation, Journal of Physics D: Applied Physics, 47 (2014) 275304. -
P. J. Liew, J. Yan, T. Kuriyagawa: Fabrication of Deep Micro Holes in Reaction-Bonded SiC by Ultrasonic Cavitation Assisted Micro EDM, International Journal of Machine Tools and Manufacture, 76 (2014) 13-20. -
J. Yan, K. Watanabe, T. Aoyama: Micro-electrical discharge machining of polycrystalline diamond using rotary cupronickel electrode, CIRP Annals – Manufacturing Technology, 63, 1 (2014) 209-212. -
Y. Kusunoki, J. Yan: Effects of element doping in ultra-precision diamond turning of single-crystal silicon, Journal of the Japan Society for Abrasive Technology, 58, 11 (2014) 699-704. -
2013
P. J. Liew, J. Yan, T. Kuriyagawa: Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide, Journal of Materials Processing Technology, 213, 7 (2013) 1076-1087. -
P. J. Liew, J. Yan, T. Kuriyagawa: Experimental Investigation on Material Migration Phenomena in Micro EDM of Reaction-Bonded Silicon Carbide, Applied Surface Science, 276 (2013) 731-743. -
Z. Zhang, H. Peng, J. Yan: Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools, International Journal of Machine Tools and Manufacture, 65, (2013) 99-106. -
P. J. Liew, J. Yan, T. Kuriyagawa: Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide, Journal of Materials Processing Technology, 213, 7 (2013) 1076-1087. -
P. J. Liew, J. Yan, T. Kuriyagawa: Experimental Investigation on Material Migration Phenomena in Micro EDM of Reaction-Bonded Silicon Carbide, Applied Surface Science, 276 (2013) 731-743. -
P. J. Liew, K. Shimada, M. Mizutani, J. Yan, T. Kuriyagawa: Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining, International Journal of Automation Technology, 7, 6 (2013) 621-629. -
J. Yan, F. Kobayashi: Laser recovery of machining damage under curved silicon surface, CIRP Annals – Manufacturing Technology, 62, 1 (2013) 199-202. -
J. Yan, Y. Nakagawa, K. Watanabe: Fabrication of Thin-Film Fresnel Optics by Combining Diamond Turning and Photolithographic Processes, International Journal of Automation Technology, 7, 4 (2013) 385-390. -
Z. Zhang, H. Peng, J. Yan: Micro-cutting characteristics of EDM fabricated high-precision polycrystalline diamond tools, International Journal of Machine Tools and Manufacture, 65, (2013) 99-106. -
2012
J. Yan, A. Horikoshi, T. Kuriyagawa, and Y. Fukushima: Manufacturing Structured Surface by Combining Microindentation and Ultraprecision Cutting, CIRP Journal of Manufacturing Science and Technology, 5, 1 (2012) 41-47. -
J. Yan, A. Horikoshi, T. Kuriyagawa, and Y. Fukushima: Manufacturing Structured Surface by Combining Microindentation and Ultraprecision Cutting, CIRP Journal of Manufacturing Science and Technology, 5, 1 (2012) 41-47. -
J. Yan, T. Asami, H. Harada, T. Kuriyagawa: Crystallographic effect on subsurface damage formation in silicon microcutting, CIRP Annals – Manufacturing Technology, 61, 1 (2012) 131-134. -
2011
J. Masuda, J. Yan, T. Zhou, T. Kuriyagawa, and Y. Fukase: Thermally-induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press, Journal of Physics D: Applied Physics, 44 (2011) 215302, pp.1-12. -
J. Yan, S. Sakai, H. Isogai, and K. Izunome: Characterization of microparticles and oxide layers generated by laser irradiation of diamond-machined silicon wafers, Semiconductor Science and Technology, 26, 2 (2011) 025006, pp.1-7. -
J. Yan, Z. Zhang, and T. Kuriyagawa: Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC, International Journal of Automation Technology, 5, 3 (2011) 307-312. -
J. Yan, S. Sakai, H. Isogai, and K. Izunome: Characterization of microparticles and oxide layers generated by laser irradiation of diamond-machined silicon wafers, Semiconductor Science and Technology, 26, 2 (2011) 025006, pp.1-7. -
J. Masuda, J. Yan, T. Zhou, T. Kuriyagawa, and Y. Fukase: Thermally-induced atomic diffusion at the interface between release agent coating and mould substrate in a glass moulding press, Journal of Physics D: Applied Physics, 44 (2011) 215302, pp.1-12. -
T. Zhou, J. Yan, J. Masuda, T. Oowada, and T. Kuriyagawa: Investigation on Shape Transferability in Ultraprecision Glass Molding Press for Microgrooves, Precision Engineering, 35, 2 (2011) 214-220. -
J. Yan, Z. Zhang, and T. Kuriyagawa: Effect of Nanoparticle Lubrication in Diamond Turning of Reaction-Bonded SiC, International Journal of Automation Technology, 5, 3 (2011) 307-312. -
J. Yan: Ultraprecision cutting of photoresist/gold composite microstructures, CIRP Annals – Manufacturing Technology, 60, 1 (2011) 133-136. -
Z. Zhang, J. Yan, and T. Kuriyagawa: Study on tool wear characteristics in diamond turning of reaction-bonded silicon carbide, International Journal of Advanced Manufacturing Technology, 57, 1 (2011) 117-125. -
2010
J. Yan, X. Gai and H. Harada: Subsurface damage of single crystalline silicon carbide in nanoindentation tests, Journal of Nanoscience and Nanotechnology, 10, 11 (2010) 7808-7811. -
J. Yan, T. Kaneko, K. Uchida, N. Yoshihara, T. Kuriyagawa: Fabricating micro grooves with varied cross-sections by electro discharge machining, International Journal of Advanced Manufacturing Technology, 50, 9-12 (2010) 991-1002. -
J. Yan, S. Muto, and T. Kuriyagawa: Development of a high-frequency pulse laser irradiation system for repairing silicon wafers damaged by abrasive machining processes, International Journal of Abrasive Technology, 3, 3 (2010) 175-189. -
T. Zhou, J. Yan, N. Yoshihara, T. Kuriyagawa: Study on Nonisothermal Glass Molding Press for Aspherical Lens, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4, 5 (2010) 804-815. -
J. Yan, Z. Zhang, and T. Kuriyagawa: Tool wear control in diamond turning of high-strength mold materials by means of tool swinging, CIRP Annals – Manufacturing Technology, 59, 1 (2010) 109-112. -
J. Yan, Z. Zhang, and T. Kuriyagawa: Fabricating micro-structured surface by using single-crystalline diamond endmill, International Journal of Advanced Manufacturing Technology, 51, 9 (2010) 957-964. -
2009
J. Masuda, J. Yan, T. Tashiro, Y. Fukase, T. Zhou and T. Kuriyagawa: Microstructural and Topographical Changes of Ni-P Plated Molds in Glass Lens Pressing, International Journal of Surface Science and Engineering, 3, 1-2 (2009) 86-102. -
T. Kiriyama, H. Harada, and J. Yan: Finite element modeling of high-pressure deformation and phase transformation of silicon beneath a sharp indenter, Semiconductor Science and Technology, 24, 2 (2009) 025014, pp. 1-12. -
J. Yan, K. Uchida, N. Yoshihara, and T. Kuriyagawa: Fabrication of micro end mills by wire EDM and some micro cutting tests, Journal of Micromechanics and Microengineering, 19, 2 (2009) 025004, pp. 1-9. -
J. Yan, S. Sakai, H. Isogai, and K. Izunome: Recovery of microstructure and surface topography of grinding-damaged silicon wafers by nanosecond-pulsed laser irradiation, Semiconductor Science and Technology, 24, 10 (2009) 105018, pp.1-6. -
J. Yan, T. Zhou, J. Masuda, and T. Kuriyagawa: Modeling high-temperature glass molding process by coupling heat transfer and viscous deformation analysis, Precision Engineering, 33, 2 (2009) 150-159. -
J. Yan, T. Zhou, N. Yoshihara, and T. Kuriyagawa: Shape transferability and microscopic deformation of molding dies in aspherical glass lens molding press, Journal of Manufacturing Technology Research, 1, 1-2 (2009) 85-102. -
J. Masuda, J. Yan, T. Tashiro, Y. Fukase, T. Zhou and T. Kuriyagawa: Microstructural and Topographical Changes of Ni-P Plated Molds in Glass Lens Pressing, International Journal of Surface Science and Engineering, 3, 1-2 (2009) 86-102. -
T. Zhou, J. Yan, J. Masuda, and T. Kuriyagawa: Investigation on the viscoelasticity of optical glass in ultraprecision lens molding process, Journal of Materials Processing Technology, 209, 9 (2009) 4484-4489. -
J. Yan, T. Oowada, T. Zhou, and T. Kuriyagawa: Precision machining of microstructures on electroless-plated NiP surface for molding glass components, Journal of Materials Processing Technology, 209, 10 (2009) 4802-4808. -
J. Yan, X. Gai, and T. Kuriyagawa: Fabricating Nano Ribbons and Nano Fibers of Semiconductor Materials by Diamond Turning, Journal of Nanoscience and Nanotechnology, 9, 2 (2009) 1423-1427. -
J. Yan, Z. Zhang, and T. Kuriyagawa: Mechanism for material removal in diamond turning of reaction-bonded silicon carbide, International Journal of Machine Tools & Manufacture, 49, 5 (2009) 366-374. -
J. Yan, H. Zhao, and T. Kuriyagawa: Effects of tool edge radius on ductile machining of silicon: an investigation by FEM, Semiconductor Science and Technology, 24, 7 (2009) 075018, pp.1-11. -
J. Yan, T. Asami, H. Harada, and T. Kuriyagawa: Fundamental investigation on subsurface damage in single crystalline silicon caused by diamond machining, Precision Engineering, 33, 4 (2009) 378-386. -
J. Yan, T. Oowada, T. Zhou, and T. Kuriyagawa: Precision machining of microstructures on electroless-plated NiP surface for molding glass components, Journal of Materials Processing Technology, 209, 10 (2009) 4802-4808. -
2008
J. Yan, T. Asami and T. Kuriyagawa: Nondestructive measurement of the machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy, Precision Engineering, 32, 3 (2008) 186-195. -
J. Yan, J. Tamaki, H. Zhao and T. Kuriyagawa: Surface and subsurface damages in nanoindentation tests of compound semiconductor InP, Journal of Micromechanics and Microengineering, 18, 10 (2008) 105018, pp.1-10. -
J. Yan, T. Asami and T. Kuriyagawa: Nondestructive measurement of the machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy, Precision Engineering, 32, 3 (2008) 186-195. -
J. Yan, T. Asami and T. Kuriyagawa: Nondestructive measurement of the machining-induced amorphous layers in single-crystal silicon by laser micro-Raman spectroscopy, Precision Engineering, 32, 3 (2008) 186-195. -
2007
T. Ohta, J. Yan, T. Kuriyagawa, S. Kodera, and T. Nakasuji: Prediction of subsurface damage depth of ground brittle materials by surface profiling, International Journal of Machining and Machinability of Materials, 2, 1 (2007) 108-124. -
T. Masaki, T. Kuriyagawa, J. Yan, and N. Yoshihara: Study on shaping spherical Poly Crystalline Diamond tool by Micro-electro-Discharge Machining and micro-grinding with the tool, International Journal of Surface Science and Engineering, 1, 4 (2007) 344-359. -
J. Yan, T. Asami and T. Kuriyagawa: Response of machining-damaged single-crystalline silicon wafers to nanosecond pulsed laser irradiation, Semiconductor Science and Technology, 22, 4 (2007) 392-395. -
T. Masaki, T. Kuriyagawa, J. Yan, and N. Yoshihara: Study on shaping spherical Poly Crystalline Diamond tool by Micro-electro-Discharge Machining and micro-grinding with the tool, International Journal of Surface Science and Engineering, 1, 4 (2007) 344-359. -
T. Ohta, J. Yan, T. Kuriyagawa, S. Kodera, and T. Nakasuji: Prediction of subsurface damage depth of ground brittle materials by surface profiling, International Journal of Machining and Machinability of Materials, 2, 1 (2007) 108-124. -
J. Yan, Y. Fan, N. Yoshihara, T. Kuriyagawa and S. Yokoyama: Numerical Simulation and Prediction of Surface Heterogeneity in Diamond Turning of Single-Crystalline Germanium, Key Engineering Materials, 329, 397-402 (2007), https://doi.org/10.4028/www.scientific.net/kem.329.397 -
T. Ohta, J. Yan, S. Yajima, Y. Takahashi, N. Horikawa, and T. Kuriyagawa: High-efficiency machining of single-crystal germanium using large-radius diamond tools, International Journal of Surface Science and Engineering, 1, 4 (2007) 374-392. -
J. Yan, H. Baba, Y. Kunieda, N. Yoshihara, and T. Kuriyagawa: Nano precision on-machine profiling of curved diamond cutting tools using a white-light interferometer, International Journal of Surface Science and Engineering, 1, 4 (2007) 441-455. -
2006
J. Yan, H. Takahashi, X. Gai, H. Harada, J. Tamaki and T. Kuriyagawa: Load effects on the phase transformation of single-crystal silicon during nanoindentation tests, Materials Science and Engineering A, 423, 1-2 (2006) 19-23. -
J. Yan, Y. Takahashi, J. Tamaki, A. Kubo, T. Kuriyagawa and Y. Sato: Ultraprecision Machining Characteristics of Poly-crystalline Germanium, JSME International Journal, Series C, 49, 1 (2006) 63-69. -
2005
J. Yan, H. Takahashi, J. Tamaki, X. Gai, H. Harada, and J. Patten: Nanoindentation tests on diamond-machined silicon wafers, Applied Physics Letters, 86, 5 (2005) 181913, pp. 1-3. -
J. Yan, H. Takahashi, J. Tamaki, X. Gai, and T. Kuriyagawa: Transmission electron microscopic observation of nanoindentations made on ductile-machined silicon wafers, Applied Physics Letters, 87, 11 (2005) 211901, pp.1-3. -
J. Yan, K. Maekawa, J. Tamaki and T. Kuriyagawa: Micro grooving on single-crystal germanium for infrared Fresnel lenses, Journal of Micromechanics and Microengineering, 15, 10 (2005) 1925-1931. -
2004
J. Yan: Laser micro-Raman spectroscopy of single-point diamond machined silicon substrates, Journal of Applied Physics, 95, 4 (2004) 2094-2101. -
J. Yan, J. Tamaki, K. Syoji and T. Kuriyagawa: Ductile Regime Machining of Single-Crystal CaF2 for Aspherical Lenses , Key Engineering Materials, 257-258, 95-100 (2004), https://doi.org/10.4028/www.scientific.net/kem.257-258.95 -
J. Yan, T. Sasaki, J. Tamaki, A. Kubo and T. Sugino: Chip Formation Behaviour in Ultra-Precision Cutting of Electroless Nickel Plated Mold Substrates, Key Engineering Materials, 257-258, 3-8 (2004), https://doi.org/10.4028/www.scientific.net/kem.257-258.3 -
J. Yan, K. Syoji and J. Tamaki: Crystallographic effects in micro/nanomachining of single-crystal calcium fluoride, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 22, 1 (2004) 46-51. -
J. Yan, K. Maekawa, J. Tamaki and A. Kubo: Experimental Study on the Ultraprecision Ductile Machinability of Single-Crystal Germanium, JSME International Journal, Series C, 47, 1 (2004) 29-36. -
J. Yan: Laser micro-Raman spectroscopy of single-point diamond machined silicon substrates, Journal of Applied Physics, 95, 4 (2004) 2094-2101. -
J. Yan, J. Tamaki, K. Syoji, and T. Kuriyagawa: Single-Point Diamond Turning of CaF2 for Nanometric Surface, International Journal of Advanced Manufacturing Technology, 24, 9-10 (2004) 640-646. -
2003
J. Yan, J. Tamaki, K. Syoji and T. Kuriyagawa: Development of a Novel Ductile-Machining System for Fabricating Axisymmetrical Aspherical Surfaces on Brittle Materials, Key Engineering Materials, 238-239, 43-48 (2003), https://doi.org/10.4028/www.scientific.net/kem.238-239.43 -
J. Yan, K. Syoji and J. Tamaki: Some observations on the wear of diamond tools in ultra-precision cutting of single-crystal silicon, Wear, 255, 712 (2003) 1380-1387. -
2002
J. Yan, K. Syoji, T. Kuriyagawa and H. Suzuki: Ductile Regime Turning at Large Tool Feed, Journal of Materials Processing Technology, 121, 2-3 (2002), 363-372. -
2001
J. Yan, M. Yoshino, T. Kuriagawa, T. Shirakashi, K. Syoji and R. Komanduri: On the Ductile Machining of Silicon for Micro Electro-mechanical Systems (MEMS), Opto-electronic and Optical Applications, Materials Science and Engineering A, 297, 1-2 (2001) 230-234. -
