※研究業績の詳細をご覧になりたい方は、こちらをクリックして下さい。
※主要論文の全文をご覧になりたい方は、こちらをクリックして下さい。
2024
- (受賞)L. Zhang, 佐藤裕亮, 閻 紀旺:2023年度日本機械学会賞(論文), 2024/4/18.
- (受賞)谷川茂:2023年度精密工学会研究奨励賞, 2024/3/13.
- (受賞)山室悠香:2023年度米沢富美子賞, 2024/3/26.
- (受賞)上田優希:専修主任賞, 2024/3/26.
- (受賞)大谷あすか:卒業研究優秀発表賞, 2024/3/25.
- (受賞)大谷あすか:卒業研究鬼頭賞, 2024/3/25.
- (受賞)川上凜太朗:精密工学会第31回学生会員卒業研究発表講演会DMG森精機賞, 2024/3/12.
- (受賞)渡邉桃果:精密工学会第31回学生会員卒業研究発表講演会優秀講演賞, 2024/3/12.
- (受賞)大谷あすか:砥粒加工学会2024ベストポスタープレゼンテーション賞, 2024/3/8.
- H. An, H. Huang, P. Xu, B. Liu, H. An, Y. Qian, J. Yan: Surface quality and mechanical property evolution of laser nitrided Zr-based metallic glass induced by laser shock flattening, Vacuum, 224(2024), 113193.
- H. An, Y. Qian, L. Zhang, Z. Zhang, H. Huang, J. Yan: On the surface characteristics and removability of RB-SiC composite processed by nanosecond pulsed laser, Composites Part A, 180(2024), 108082.
- F. Brüssel, W. Huang, J. Yan: Investigation of failure modes and material structural responses of nanographite coatings on single-crystal silicon by nanoscratching, Tribology International, 193(2024), 109349.
- Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Effect of dopant concentration on femtosecond pulsed laser irradiation of yttria-stabilized zirconia for generating nanopores, Journal of Alloys and Compounds, 980(2024), 173596.
- J. Hong, H. Huang, L. Zhang, Z. Zhang, M. Jiang, J. Yan: Laser polishing and simultaneous hardening of the electrical discharge machined Zr-based metallic glass surface, Materials & Design, 237(2024), 112599.
2023
- (受賞)閻 紀旺:IJEM Best Editor Award, 2023/12.
- (受賞)山室悠香:JSME女性未来賞, 2023/12/1.
- (受賞)橋本剛:CJUMP2023 Best Paper Award, 2023/10/24.
- (受賞)Ben Watkins:CJUMP2023 Best Paper Award, 2023/10/24.
- (受賞)新野涼介:CJUMP2023 Best Presentation Award, 2023/10/24.
- (受賞)L. Zhang:2023年度精密工学会論文賞, 2023/3/15.
- (受賞)佐藤裕亮:IJEM2022 Best Paper Award, 2023/3/10.
- (受賞)和田将尚:2023年砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2023/3/9.
- (受賞)小西祐平:2023年砥粒加工学会卒業研究発表会ベストポスタープレゼンテーション賞, 2023/3/9.
- (受賞)上田優希:JSME若手優秀講演フェロー賞, 2023/3/3.
- T. Tsuchida, W. Huang, J. Yan: Surface conditioning of zirconia ceramic by enhanced ultrasonic vibration-assisted burnishing, Production Engineering, https://doi.org/10.1007/s11740-023-01242-2.
- Y. Yamamuro, T. Shimoyama, H. Nagata, J. Yan: Femtosecond Pulsed Laser Irradiation of Zirconia for Embedding Silver Nanoparticles in Surface Nanopores, Applied sciences, 13(2023), 13108.
- M. Cui, H. Huang, H. Wu, L. Zhang, J. Yan: Achieving superhydrophobicity of Zr-based metallic glass surface with anti-corrosion and anti-icing properties by nanosecond laser ablation and subsequent heat treatment, Surface & Coatings Technology, 475(2023), 130159.
- C. Wang, H. Huang, H. Wu, J. Hong, L. Zhang, J. Yan: Ultra-low wear of titanium alloy surface under lubricated conditions achieved by laser texturing and simultaneous nitriding, Surface & Coatings Technology, 474(2023), 130083.
- W. Huang, K. Nagayama, J. Yan: Fabrication of microlens arrays on single-crystal CaF2 by ultraprecision diamond turning, Journal of Materials Processing Tech., 321(2023), 118133.
- W. Huang, J. Yan: Mechanisms of tool-workpiece interaction in ultraprecision diamond turning of single-crystal SiC for curved microstructures, International Journal of Machine Tools and Manufacture, 191 (2023), 104063.
- S. Tanikawa, Y. Sato, J. Yan: A novel calibration method for angular misalignment in independently controlled fast tool servo-based diamond turning, Precision Engineering, 83 (2023), 216-227.
- D. Kitagawa, T. Meshram, J. Yan: 刃先にレーザ加工を施したcBN工具を用いた鉄系金属のマイクロ溝加工の試み, 砥粒加工学会誌, 67, 6 (2023) 341-346.
- C. He, J. Yan, S. Wang, S. Zhang, G. Chen, C. Ren: A theoretical and deep learning hybrid model for predicting surface roughness of diamond-turned polycrystalline materials, International Journal of Extreme Manufacturing, 5 (2023) 035102.
- K. Minami, K. Kobinata, J. Yan: Multilayer Graphene‐Coated Silicon Carbide Nanowire Formation Under Defocused Laser Irradiation, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-023-00203-8.
- T. Meshram, J. Yan: Formation of Laser-Induced Periodic Surface Structures on Reaction-Bonded Silicon Carbide by Femtosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology,
https://doi.org/10.1007/s41871-023-00184-8.
2022
- (受賞)山室悠香:ICPE 2022 Young Researcher Award, 2022/12/2.
- (受賞)北川大地:2022年度砥粒加工学会 優秀講演賞, 2022/10/28.
- (受賞)笠毛德太郎:PRESM 2022 Outstanding Presentation Award, 2022/08/26.
- (受賞)南かのん:2022年度精密工学会春季大会ベストプレゼンテーション賞, 2022/06/14.
- (受賞)佐藤裕亮:日本機械学会若手優秀講演フェロー賞, 2022/04/15.
- (受賞)Weihai Huang:慶應義塾大学大学院理工学研究科藤原賞, 2022/3/28.
- (受賞)中島あゆ美:慶應義塾大学大学院理工学研究科総合デザイン工学専攻優秀研究活動賞(修士), 2022/3/28.
- (受賞)佐藤裕亮:CJUMP2022 Best Paper Award, 2022/3/25-27.
- (受賞)上田優希:精密工学会第29回学生会員卒業研究発表講演会エクセレントプレゼンテーション賞, 2022/3/15.
- (受賞)清水槙利:精密工学会第29回学生会員卒業研究発表講演会最優秀講賞, 2022/3/15.
- (受賞)笠毛 徳太郎:2022年砥粒加工学会卒業研究発表会ベストプレゼンテーション賞, 2022/3/4.
- (受賞)新野涼介:2022年砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2022/3/4.
- Y. Yamamuro, T. Shimoyama, J. Yan: Generation of nanopore structures in yttria-stabilized zirconia by femtosecond pulsed laser irradiation, Journal of Materials Research and Technology, 23 (2023), 1155-1176.
- W. Huang, J. Yan: Effect of tool geometry on ultraprecision machining of soft-brittle materials: a comprehensive review, International Journal of Extreme Manufacturing, 5 (2023) 012003.
- L. Zhang, Y. Sato, J. Yan: Optimization of fast tool servo diamond turning for enhancing geometrical accuracy and surface quality of freeform optics, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.17, No.1, 2023.
- M. Omiya, A. Nakajima, J. Yan: Design and fabrication of micro and nano surface structures for enhancing metal–polymer adhesion using femtosecond laser treatment, Materials & Design, 224 (2022) 111349.
- W. Huang, J. Yan: Towards understanding the mechanism of vibration-assisted cutting of monocrystalline silicon by cyclic nanoindentation, Journal of Materials Processing Tech, 311 (2023) 117797.
- L. Zhang, J. Yan: Study on nano-graphitic carbon coating on Si mold insert for precision glass molding, Surface & Coatings Technology, 448 (2022) 128893.
- G. Esser, J. Yan: Direct Observation of Discharge Phenomena in Vibration-Assisted Micro EDM of Array Structures, Micromachines 2022, 13, 1286.
- Y. Ueda, N. Sakurai, T. Takagi, K. Ishizu, J. Yan: Exploratory investigation of chip formation and surface integrity in ultrahigh-speed gear hobbing, CIRP Annals – Manufacturing Technology, 71 (2022), 89-92.
- S. Gattu, J. Yan: Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders, Micromachines, 13 (2022), 998.
- A. Nakajima, M. Omiya, J. Yan: Generation of micro/nano hybrid surface structures on copper by femtosecond pulsed laser irradiation, Nanomanufacturing and Metrology.
- Y. Sato, J. Yan: Tool path generation and optimization for freeform surface diamond turning based on an independently controlled fast tool servo, International Journal of Extreme Manufacturing, 4 (2022), 025102.
- K. Minami, K. Kobinata, J. Yan: Generation of Si@C/SiC@C core–shell nanoparticles by laser irradiation of silicon grinding waste, Nano Select.
2021
- (受賞)佐藤裕亮:Young Researcher Award, The 10th International Conference on Leading Edge Manufacturing in 21st Century(LEM21), 2021/11/18.
- (受賞)T. Meshram:Student Award, 2021 World Congress on Micro and Nano Manufacturing(WCMNM2021), 2021/9/23.
- (受賞)南かのん:Outstanding Presentation Award, International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM) 2021, 2021/7/23.
- (受賞)W. Huang:euspen’s 21st International Conference, HEIDENHAIN Scholarship, 2021/6/10.
- (受賞)長山晃大:工作機械技術振興財団第42回工作機械技術振興賞(論文賞), 2021/6.
- (受賞)笠井慎平:工作機械技術振興財団第42回工作機械技術振興賞(論文賞), 2021/6.
- (受賞)寺林俊雄:日本機械学会賞(論文), 2021/4/22.
- (受賞)榎本圭太:精密工学会第28回学生会員卒業研究発表講演会エクセレントプレゼンテーション賞, 2021/3/29.
- (受賞)山室悠香:慶應義塾大学大学院理工学研究科総合デザイン工学専攻優秀研究活動賞(修士), 2021/3/26.
- A. Nakajima, J. Yan: Response of Resin Coating Films Containing Fine Metal Particles to Ultrashort Laser Pulses, International Journal of Precision Engineering and Manufacturing.
- L. Zhang, J. Yan: Flexible fabrication of Fresnel micro-lens array by off-spindle-axis diamond turning and precision glass molding, Precision Engineering, 74 (2022) 186–194.
- S. Tanikawa, J. Yan: Fabrication of micro-structured surface with controllable randomness by using FTS-based diamond turning, Precision Engineering, 73 (2022), 363–376.
- W. Huang, J. Yan: Deformation behaviour of soft-brittle polycrystalline materials determined by nanoscratching with a sharp indenter, Precision Engineering, 72 (2021), 717–729.
- Y. Kamada, J. Yan: Machinability Investigation for Cellulose Nanofiber-Reinforced Polymer Composite by Ultraprecision Diamond Turning, International Journal of Automation Technology. Vol.15 No.4, 2021.
- L. Zhang, T. Hashimoto, J. Yan: Machinability exploration for high-entropy alloy FeCrCoMnNi by ultrasonic vibration-assisted diamond turning, CIRP Annals – Manufacturing Technology. 70 (2021) 37-40.
- Y. Yamamuro, T. Shimoyama, J. Yan: Microscale Surface Patterning of Zirconia by Femtosecond Pulsed
Laser Irradiation, International Journal of Precision Engineering and Manufacturing-Green Technology, https://doi.org/10.1007/s40684-021-00362-3. - W. Huang, J. Yan: Fundamental Investigation of Diamond Cutting of Micro V-Shaped Grooves on a Polycrystalline Soft-Brittle Material, Journal of Manufacturing and Materials Processing. 2021, 5, 17. https://doi.org/10.3390/jmmp5010017.
- K. Nagayama, J. Yan: Deterministic error compensation for slow tool servo-driven diamond turning of freeform surface with nanometric form accuracy, Journal of Manufacturing Processes, 64 (2021), 45-57.
- L. Zhang, J. Yan: Evolution of high-pressure metastable phase Si-XIII during silicon nanoindentation: A molecular dynamics study, Computational Materials Science, 191 (2021), 110344.
- W. Huang, J. Yan: Chip-free surface patterning of toxic brittle polycrystalline materials through micro/nanoscale burnishing, International Journal of Machine Tools and Manufacture, 162 (2021), 103688.
2020
- (受賞)中島あゆ美:Best Paper Award, International Symposium on Precision Engineering and Sustainable Manufacturing(PRESM) 2020, 2020/11/18.
- (受賞)寺町亮則:日本機械学会三浦賞, 2020/3/26.
- (受賞)佐藤裕亮:慶應義塾大学理工学部機械工学科卒業研究優秀発表賞, 2020/3/23.
- (受賞)砂場勇輝:砥粒加工学会賞論文賞, 2020/2/28.
- K. Kosai, J. Yan: Effects of cyclic loading on subsurface microstructural changes of zirconia polycrystals in nanoscale mechanical processing, International Journal of Machine Tools and Manufacture, 159 (2020), 103626.
- H. Huang, Y. Qian, C. Wang, J. Yan: Laser induced micro-cracking of Zr-based metallic glass using 1011 w/m2 nano-pulses, Materials Today Communications, 25 (2020), 101554.
- T. Zhou, Y. He, T. Wang, X. Dong, P. Liu, W.Zhao, Y. Hu, J. Yan: Algorithm of Micro-Grooving and Imaging Processing for the Generation of High-Resolution Structural Color Images, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00068-1.
- K. Nagayama, J. Yan: Measurement and Compensation of Tool Contour Error Using White Light Interferometry for Ultra-Precision Diamond Turning of Freeform Surfaces, Int. J. of Automation Technology, 14, 4 (2020) 654-664.
- 寺町 亮則, ターヴァイネンさゆり, 閻 紀旺: フレキシブルステージを用いた超音波振動援用研削による超硬合金の穴あけ加工, 砥粒加工学会誌, 64, 6 (2020) 320-325.
- T. Meshram, J. Yan: Generation of microcones on reaction-bonded silicon carbide by nanosecond pulsed laser irradiation, The International Journal of Advanced Manufacturing Technology, 108 (2020), 1039-1048.
- T. Shitara, K. Fujita, J. Yan: Direct observation of discharging phenomena in vibration-assisted micro-electrical discharge machining, The International Journal of Advanced Manufacturing Technology, 108 (2020), 1125-1138.
- T. Kobayashi, J.Yan: Generating Nanodot Structures on Stainless-Steel Surface by Cross Scanning of a Picosecond Pulsed Laser, Nanomanufacturing and Metrology, https://doi.org/10.1007/s41871-020-00063-6.
- K. Momoki, K. Takahashi, K. Kobinata, Y. Kobayashi, A. Kawai, J. Yan: Generating Silicon Nanofiber Clusters from Grinding Sludge by Millisecond Pulsed Laser Irradiation, Nanomaterials, Vol.10 No.812, 2020.
- W. Huang, J. Yan: Surface formation mechanism in ultraprecision diamond turning of coarse-grained polycrystalline ZnSe, International Journal of Machine Tools & Manufacture, 153 (2020), 103554.
- X. Zhang, Y. Chueh, C. Wei, Z. Sun, J. Yan, L. Li: Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing, Additive Manufacturing, 33 (2020), 101113.
- T. Terabayashi, J. Yan: Surface Formation Behaviors in Wavy Microgroove Cutting on Various Workpiece Materials, International Journal of Automation Technology, Vol.14 No.2, 2020.
- S. N. Ameli Kalkhoran, M. Vahdati, Z. Zhang, J. Yan: Influence of Wax Lubrication on Cutting Performance of Single‑Crystal Silicon in Ultraprecision Microgrooving, International Journal of Precision and Manufacturing-Green Technology, https://doi.org/10.1007/s40684-020-00198-3.
- K. Momoki, T. Manabe, L. Li, J. Yan: Silicon nanoparticle generation and deposition on glass from waste silicon powder by nanosecond pulsed laser irradiation, Materials Science in Semiconductor Processing, 111 (2020), 104998.
- Y. Yamamuro, T. Shimoyama, I. Yamashita, J. Yan: Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010907.
- R. Kishi, J. Yan: Electrical Discharge/Electrochemical Hybrid Machining Based on the Same Machine and Tool Electrode, Journal of Micro- and Nano-Manufacturing, 8 (2020), 010906.
- K. Momoki, J. Yan: Nanoparticle generation from various types of silicon materials by nanosecond-pulsed laser irradiation, Applied Physics Express, 13 (2020), 026505.
- K. Niitsu, J. Yan: Effects of deep subsurface damages on surface nanostructure formation in laser recovery of grinded single-crystal silicon wafers, Precision Engineering, 62 (2020), 213-222.
- S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Effect of relative tool sharpness on subsurface damage and material recovery in nanometric cutting of mono-crystalline silicon: A molecular dynamics approach, Materials Science in Semiconductor Processing, 108 (2020) 104868.
- (総説)E. Brinksmeier, B. Karpuschewski, J. Yan: Manufacturing of multiscale structured surfaces, CIRP Annals – Manufacturing Technology, 69 (2020), 717-739.
- (総説) 長山晃大, 閻 紀旺:自由曲面微細構造の超精密切削加工とそれを実現するための工具形状計測, 機械と工具, 10, 3 (2020) 8-12.
- (総説)P. J. Liew, C. Y. Yap, J. Wang, T. Zhou, J. Yan: Surface modification and functionalization by electrical discharge coating, International Journal of Extreme Manufacturing, 2 (2020) 012004.
2019
- (受賞)齋藤雄介:Best Paper Award, 8th International Conference of ASPEN, 2019/11/14.
- (受賞)香西孝司:2019年度砥粒加工学会学術講演会優秀講演賞, 2019/11/1.
- (受賞)Qian Yu:The 15th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2019), Excellent Paper Award, 2019/9/28.
- (受賞)SD.Gattu: Excellent presentations of Rank 3, 40th MATADOR International Conference on Advanced Manufacturing and Design, 2019/7/10.
- (受賞)岸諒一郎:工作機械技術振興財団第40回工作機械技術振興賞(奨励賞), 2019/6/17.
- (受賞)高山望:日本機械学会三浦賞, 2019/3/28.
- (受賞)奥内拓海:2019年度精密工学会春季大会学術講演会ベストプレゼンテーション賞, 2019/3/15.
- (受賞)岸諒一郎:慶應義塾大学理工学部機械工学科卒業研究優秀発表賞, 2019/3/25.
- (受賞)岸諒一郎:2019年砥粒加工学会卒業研究発表会ベストポスタープレゼンテーション賞, 2019/2/28.
- (受賞)山室悠香:2019年砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2019/2/28.
- 笠井慎平,袖平智樹,閻紀旺: 炭素拡散反応を用いた形彫り放電加工による多結晶ダイヤモンドの3次元形状創製, 電気加工学会誌, 53, 132 (2019) 5-11.
- 黒澤智子,閻紀旺: 多結晶ダイヤモンド円盤工具を用いた単結晶SiCの放電研削複合加工, 電気加工学会誌, 53, 132 (2019) 12-18.
- H. Ishide, J. Yan: Study on Infrared Transmittance of Si-Polymer Hybrid Structure Press Molded Using a Coupling Agent, Journal of Automation Technology Vol.13, (2019), No.6, 817-824.
- X. Yang, N. Tachikawa, Y. Katayama, L. Lin, J. Yan: Effect of the Pillar Size on the Electrochemical Performance of Laser-Induced Silicon Micropillars as Anodes for Lithium-Ion Batteries, Appl. Sci. 2019, 9, 3623.
- S. N. Ameli Kalkhoran, M. Vahdati, J. Yan: Molecular dynamics investigation of nanometric cutting of single-crystal silicon using a blunt tool, JOM(2019). https://doi.org/10.1007/s11837-019-03671-w
- A. Teramachi, J. Yan: Improving the Surface Integrity of Additive-Manufactured Metal Parts by Ultrasonic Vibration-Assisted Burnishing, Journal of Micro- and Nano-Manufacturing, JUNE 2019, Vol. 7, 024501.
- J. Yan, T. Okuuchi: Chip morphology and surface integrity in ultrasonic cutting of yttria-stabilized tetragonal zirconia polycrystal, CIRP Annals – Manufacturing Technology, 68(2019) 53-56.
- 寺林俊雄,閻紀旺: 2成分の波状微細構造をもつロール金型の超精密切削加工, 日本機械学会論文集, Vol.85, No.874 (2019).
- P. Beiring, J. Yan: Ultrasonic vibration-assisted microgrinding of glassy carbon, Journal of Mechanical Engineering Science, Vol. 233(12) (2019), 4165-4175.
- T. Kobayashi, T. Wakabayashi, Y. Takushima, J. Yan: Formation behavior of laser-induced periodic surface structures on stainless tool steel in various media, Precision Engineering, 57 (2019), 244-252.
- K. Kosai, J. Yan: Direct observations of multi-cyclic nanoindentation-induced phase transformations in single-crystal Ge, Materials Research Express, 6 (2019), 075065.
- M. Heidari, J. Akbari, J. Yan: Effects of tool rake angle and tool nose radius on surface quality of ultraprecision diamond-turned porous silicon, Journal of Manufacturing Processes, 37 (2019), 321-331.
- K. Niitsu, Y. Tayama, T. Kato, J. Yan: Laser recovery of grinding-induced subsurface damage in the edge and notch of a single-crystal silicon wafer, Surface Topography: Metrology and Properties, 7 (2019).
- Z. He, J. Li, Y. Liu, J. Yan: Investigation on wear modes and mechanisms of abrasive belts in grinding of U71Mn steel, International Journal of Advanced Manufacturing Technology, 101, 5–8 (2019) 1821–1835.
- Z. He, J. Li, Y. Liu, J. Yan: Single-grain cutting based modeling of abrasive belt wear in cylindrical grinding, Friction, (2019) 1-13.
- Y. El-Taybany, M. Hossam, J. Yan, H. El-Hofy: Surface roughness in ultrasonic-assisted and conventional milling of soda-lime glass, International Journal of Machining and Machinability of Materials, 21, 1/2 (2019) 82–99.
- (総説)漆畑卓朗, 石田 宏,杉山善崇,若林知敬,多久島裕一,閻 紀旺:複合レーザプロセスによる積層造形品の平滑化, レーザ加工学会誌, 26, 2 (2019) 44-46.
- (総説)閻 紀旺:ピコ秒パルスレーザ照射による鋼材表面の平坦化とナノ周期構造形成, 機械技術, 67, 8 (2019) 26-30.
- (総説)若林知敬,漆畑卓朗, 小林知貴,閻 紀旺:レーザー複合プロセスによる金型材の平滑化加工, 型技術, 34, 4 (2019) 22-25.
- (総説)Z. Zhang, J Yan, T. Kuriyagawa: Manufacturing technologies toward extreme precision, International Journal of Extreme Manufacturing, 1 (2019) 022001.
2018
- (受賞)高山望:International PhD Academic Forum on Intelligent Manufacturing (IPAFIM 2018), Best Presentation Award, 2018/10/26.
- (受賞)長山晃大:The 14th Chine-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2018), Best Paper Award and Young Researcher Award, 2018/9/15.
- (受賞)香西孝司:The 4th CIRP Conference on Surface Integrity (CIRP CSI 2018), Best Paper Award, 2018/7/13.
- (受賞)石塚潤:マザック財団優秀論文賞, 2018/4/6.
- (受賞)M. Heidari:精密工学会2017年度研究奨励賞, 2018/3/16.
- (受賞)鈴木孝彰:精密工学会2017年度高城賞, 2018/3/16.
- (受賞)荒木信乃,石出響,長山晃大:精密工学会第25回学生会員卒業研究発表会エクセレントプレゼンテーション賞, 2018/3/15.
- 砂場 勇輝, 立川直樹, 片山 靖, 閻 紀旺: シリコン切りくずと金属微粒子の高圧焼結によるポーラス複合構造体の創製, 砥粒加工学会誌, 62, 11 (2018) 584-588.
- T. Kobayashi, H. Sera, T. Wakabayashi, H. Endo, Y. Takushima, J. Yan: Surface Flattening and Nanostructuring of Steel by Picosecond Pulsed Laser Irradiation, Nanomanufacturing and Metrology, (2018).
- H. Huang, M. Jiang, J. Yan: The coupling effects of laser thermal shock and surface nitridation on mechanical properties of Zr-based metallic glass, Journal of Alloys and Compounds, 770 (2019), 864-874.
- H. Huang, J. Yan: Multi-scale dimple creation on metallic glass by a two-step method involving nanoindentation and polishing, Applied Surface Science, 462 (2018), 565–574.
- J. Yan, Y. Imoto: Nanoscale surface patterning of diamond utilizing carbon diffusion reaction with a microstructured titanium mold, CIRP Annals – Manufacturing Technology, 67 (2018), 181–184.
- N. Takayama, J. Ishizuka, J. Yan: Microgrooving of a single-crystal diamond tool using a picosecond pulsed laser and some cutting tests, Precision Engineering, 53 (2018), 252–262.
- N. Takayama, S. Asaka, J. Yan: Nanosecond pulsed laser irradiation of sapphire for developing
microstructures with deep V-shaped grooves, Precision Engineering, 52 (2018), 440–450. - M. Heidari, J. Yan: Material removal mechanism and surface integrity in ultraprecision cutting
of porous titanium, Precision Engineering, 52 (2018), 356–369. - K. Niitsu, Y. Tayama, T. Kato, H. Maehara, J. Yan: Characterization of recrystallized depth and dopant distribution in laser recovery of grinding damage in single-crystal silicon, Materials Science in Semiconductor Processing, 82 (2018), 54–61.
- Q. Wang, F. Zhou, Q. Ma, M. Callisti, T. Polcar, J. Yan: Fracture toughness and sliding properties of magnetron sputtered CrBC and CrBCN coatings, Applied Surface Science, 443 (2018), 635–643.
- 石塚 潤, 長澤圭祐, 三神政之, 閻 紀旺: フッ化物ガラスの超精密切削 – 仕上げ面生成と工具損傷の基礎検討 -, 砥粒加工学会誌, 62, 2 (2018) 88-93.
- R. Komiya, T. Kimura, T. Nomura, M. Kubo, J. Yan: Ultraprecision cutting of single-crystal calcium fluoride for fabricating micro flow cells, Journal of Advanced Mechanical Design,Systems,and Manufacturing, 12, 1 (2018).
- 鈴木孝彰, 大槻俊紀, 閻 紀旺: 極細線固定砥粒ダイヤモンドワイヤによる単結晶SiC の精密切断, 日本機械学会論文集, 84, 857 (2018).
- M. Heidari, J. Yan: Nanometer-scale chip formation and surface integrity of pure titanium in diamond turning, International Journal of Advanced Manufacturing Technology, 95 (2018), 479-492.
- (総説)閻 紀旺:単結晶Siの加工変質層-形成, 評価,修復,精密工学会誌, 84,12 (2018) 971-974.
- (総説)漆畑卓朗, 若林知敬,多久島裕一,閻 紀旺:複合レーザープロセスによる工具鋼の平滑化, 光アライランス, 29, 11 (2018) 45-49.
- (総説) 閻 紀旺:レーザ照射による単結晶シリコンの欠陥修復と表面性状制御, レーザ協会誌,42,3 (2018) 16-21.
- (総説) 閻 紀旺:熱化学反応を利用したダイヤモンド単結晶のナノ加工, 化学工業,69,5 (2018) 33-39.
2017
- (受賞)寺林俊雄:The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017), Best Paper Award, 2017/11/22.
- (受賞)高山望:The 9th International Conference on Leading Edge Manufacturing for 21st Century (LEM21), Best Presentation Award, 2017/11/16.
- (受賞)高山望:2017年度精密工学会秋季大会ポスタープレゼンテーション賞, 2017/9/22.
- (受賞)黒澤智子:工作機械技術振興財団第38回工作機械技術振興賞(奨励賞), 2017/6/19.
- (受賞)高山望:World Congress on Micro and Nano Manufacturing (WCMNM2017), Best Student Paper Presentation Award, 2017/3/30.
- (受賞)高山望:慶応工学会賞, 2017/3/23.
- (受賞)高山望:慶應義塾大学理工学部藤原賞, 2017/3/23.
- (受賞)井本祐司:2017年度精密工学会春季大会学術講演会ベストプレゼンテーション賞, 2017/3/15.
- (受賞)石塚潤:精密工学会第24回学生会員卒業研究発表講演会最優秀講演賞, 2017/3/13.
- (受賞)高山望:2017年砥粒加工学会卒業研究発表会ベストプレゼンテーション賞, 2017/3/3.
- (受賞)奥内拓海:2017年砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2017/3/3.
- K. Kosai, H. Huang, J. Yan: Comparative Study of Phase Transformation in Single-Crystal Germanium during Single and Cyclic Nanoindentation, Crystals, 7 (2017), 333.
- M. Mukaida, J. Yan: Fabrication of Hexagonal Microlens Arrays on Single-Crystal Silicon Using the Tool-Servo Driven Segment Turning Method, Micromachines, 8 (2017), 323.
- H. Huang, J. Yan: Investigating shear band interaction in metallic glasses by adjacent nanoindentation, Materials Science & Engineering A, 704 (2017), 375-385.
- T. Suzuki, Y. Nishino, J. Yan: Mechanisms of material removal and subsurface damage in fixed-abrasive diamond wire slicing of single-crystalline silicon, Precision Engineering, 50 (2017), 32-43.
- N. Takayama, J. Yan: Laser Irradiation Responses of a Single-Crystal Diamond Produced by Different Crystal Growth Methods, Applied Sciences, 7 (8), 815 (2017).
- 井本祐司, 閻 紀旺:純鉄金型を用いたプレス転写による単結晶ダイヤモンドへの微細形状創成,精密工学会誌,83, 8 (2017) 770-774.
- J. Yan, J. Noguchi, Y. Terashi,: Fabrication of single-crystal silicon micro pillars on copper foils by nanosecond pulsed laser irradiation, CIRP Annals – Manufacturing Technology, 66 (2017) 253-256.
- M. Matsumoto, H. Huang, H.Harada, K.Kakimoto and J. Yan: On the phase transformation of single-crystal 4H–SiC during nanoindentation, Journal of Physics D: Applied Physics, 50 (2017) 265303.
- H. Huang and J. Yan: Surface patterning of Zr-based metallic glass by laser irradiation induced selective thermoplastic extrusion in nitrogen gas, Journal of Micromechanics and Microengineering, 27 (2017) 075007.
- M. Heidari and J. Yan: Ultraprecision surface flattening of porous silicon by diamond turning, Precision Engineering, 49 (2017) 262-277.
- M. Heidari and J. Yan: Fundamental characteristics of material removal and surface formation in diamond turning of porous carbon,
International Journal of Additive and Subtractive Materials Manufacturing, 1 (2017) 23-41. - M. Mukaida and J. Yan: Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo, International Journal of Machine Tools & Manufacture, 115 (2017) 2-14.
- N. Takayama, J. Yan: Mechanisms of micro-groove formation on single-crystal diamond by a nanosecond pulsed laser, Journal of Materials Processing Technology, 243 (2017) 299-311.
- A. R. Abdul Manaf, T. Sugiyama, J. Yan: Design and fabrication of Si-HDPE hybrid Fresnel lenses for infrared imaging systems, Optics Express, 25 (2017) 1202.
- Y. Imoto, J. Yan: Thermochemical micro imprinting of single-crystal diamond surface using a nickel mold under high-pressure conditions, Applied Surface Science, 404 (2017) 318-325.
- A. R. Abdul Manaf, J. Yan: Improvement of form accuracy and surface integrity of Si-HDPE hybrid micro-lens arrays in press molding, Precision Engineering, 47 (2017) 469-479.
- T. Tan, J. Yan: Atomic-scale characterization of subsurface damage and structural changes of single-crystal silicon carbide subjected to electrical discharge machining, Acta Materialia, 123 (2017) 362-372.
- J. Wang, L. Wan, J. Chen, J. Yan: Micropatterning of diamond crystallites via cobalt-catalyzed thermochemical etching, Journal of Material Science, 52 (2017) 709-720.
- (総説) 閻 紀旺:スローツールサーボを用いた硬脆材料の自由曲面切削, 機械技術, 65, 10 (2017) 72-75.
- (総説) P. J. Liew, A. Shaaroni, N. A. C. Sidik, J. Yan: An overview of current status of cutting fluids and cooling techniques of turning hard steel, International Journal of Heat and Mass Transfer, 114 (2017) 380-394.
2016
- (受賞)向田茉央,奥内拓海:第17回国際工作機械技術者会議(The 17th IMEC)優秀ポスター賞, 2016/11/20.
- (受賞)山崎剛史:The 12th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2016), Young Researcher Award, 2016/11/06.
- (受賞)山崎剛史:砥粒加工学会平成28年度優秀講演賞, 2016/10/24.
- (受賞)香西孝司:精密工学会第23回学生会員卒業研究発表講演会優秀講演賞, 2016/3/15.
- (受賞)嶋本悠里:2016年砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2016/3/4.
- 山崎剛史,閻 紀旺:超音波振動援用研削によるCFRP の高精度微細溝加工,砥粒加工学会誌,60, 12 (2016) 659-664.
- H. Huang, J. Noguchi, J. Yan: Shield gas induced cracks during nanosecond-pulsed laser irradiation of Zr-based metallic glass, Applied Physics A, 122, 10 (2016) 881.
- H. Huang, J. Yan: Microstructural changes of Zr-based metallic glass during micro-electrical discharge machining and grinding by a sintered diamond tool, Journal of Alloys and Compounds, 688 (2016) 14-21.
- H. Huang, J. Noguchi, M. Jiang, R. Moriya, J. Yan: Nanosecond pulsed laser irradiation induced hierarchical micro/nanostructures on Zr-based metallic glass substrate, Materials & Design, 109 (2016) 153-161.
- W. Wang, P. Yao, J. Wang, C. Huang, H. Zhu, B. Zou, H. Liu, J. Yan: Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions, International Journal of Machine Tools and Manufacture, 109 (2016) 126-136.
- C. Liu, J. Yan, and S. Lin: Diamond turning of high-precision roll-to-roll imprinting molds for fabricating subwavelength gratings, Optical Engineering, 55(6) (2016) 064105.
- J. Yan, K. Okada: Fabrication of silicon-based porous nanocomposite films by focused infrared light sintering, CIRP Annals-Manufacturing Technology, 65 (2016) 217-220.
- J. Wang, L. Wan, J. Chen, J. Yan: Surface patterning of synthetic diamond crystallites using nickel powder, Diamond & Related Materials, 66 (2016) 206-212
- H. Huang, J. Yan: Volumetric and timescale analysis of phase transformation in single-crystal silicon during nanoidentation, Applied Physics A – Material Science & Processing, 122, 607 (2016) 1-11.
- H. Huang, J. Zhang, C. Shek, J. Yan: Effects of pre-compression deformation on nanoindentation response of Zr65Cu15Al10Ni10 bulk metallic glass, Journal of Alloys and Compounds, 674 (2016) 223-228.
- H. Huang, J. Yan: In situ characterization of formation and growth of high-pressure phases in single-crystal silicon during nanoindentation, Applied Physics A – Material Science & Processing, 122, 409 (2016) 1-7.
- 鈴木孝彰,大槻俊紀,閻 紀旺:ダイシングワイヤーソーによる単結晶シリコンの精密切断に関する研究,砥粒加工学会誌,60, 2 (2016) 97-103.
- Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K.-Y. Li: Microstructure, mechanical and tribological properties of CrSiC coatings sliding against SiC and Al2O3 balls in water, Applied Surface Science, 368 (2016) 129-139.
- Z. Wu, F. Zhou, K. Chen, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li: Friction and wear properties of CrSiCN coatings with low carbon content as sliding against SiC and steel balls in water, Tribology International, 94 (2016) 176-186.
- Q. Wang, F. Zhou, J. Yan: Evaluating mechanical properties and crack resistance of CrN, CrTiN, CrAlN and CrTiAlN coatings by nanoindentation and scratch tests, Surface and Coatings Technology, 285 (2016) 203-213.
- A. R. Abdul Manaf, J. Yan: Press Molding of a Si-HDPE Hybrid Lens Substrate and Evaluation of Its Infrared Optical Properties, Precision Engineering, 43 (2016) 429-438.
- (総説)山崎剛史, 閻 紀旺:CFRPの穴あけ研削加工における超音波振動振動の効果, 超音波テクノ, 28, 6 (2016) 8-12.
- (総説)閻 紀旺: 廃シリコン粉末のレーザ焼結によるLiB電極材の創製, レーザ加工学会誌, 23, 1 (2016) 72-75.
2015
- (受賞)向田茉央:The 11th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2015), Young Researcher Award, 2015/11/27.
- (受賞)岡田航雅:砥粒加工学会平成27年度優秀講演賞, 2015/11/13.
- (受賞)Ahmad Rosli: The 8th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Best Paper Award, 2015/10/20.
- (受賞)向田茉央:工作機械技術振興財団第36次工作機械技術振興賞(奨励賞), 2015/6/22.
- (受賞)向田茉央:euspen’s 15th International Conference – HEIDENHAIN Scholarship, Leuven, Belgium, 2015/06/03.
- (受賞)野口 淳:慶應義塾大学理工学部機械工学科卒業研究優秀発表賞, 2015/3/23.
- (受賞)向田茉央:精密工学会第22回学生会員卒業研究発表講演会優秀講演賞, 2015/3/17.
- (受賞)山崎剛史:2015年度砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2015/3/6.
- 山崎剛史,閻 紀旺:超音波振動援用研削によるCFRP の高精度穴あけ加工,砥粒加工学会誌,59, 12 (2015) 699-704.
- H. Huang, J. Yan: Possibility for rapid generation of high-pressure phases in single-crystal silicon by fast nanoindentation, Semiconductor Science and Technology, 30 (2015) 115001.
- K. Asakura, J. Yan: Water Repellency Control of Oxygen-Free Copper Surface by Diamond-Cut Micro Grooves, International Journal of Automation Technology, 9 (2015) 396-402.
- H. Huang, J. Yan: On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining, Applied Surface Science, 355 (2015) 1306-1315.
- Q. Wang, Z. Wu, F. Zhou, J. Yan: Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation, Materials Science and Engineering: A, 642 (2015) 391-397.
- H. Huang, J. Yan: On the mechanism of secondary pop-out in cyclic nanoindentation of single-crystal silicon, Journal of Materials Research, 30, 11 (2015) 1861-1868.
- J. Yan, T. H. Tan: Sintered diamond as a hybrid EDM and grinding tool for the micromachining of single-crystal SiC, CIRP Annals – Manufacturing Technology, 64, 1 (2015) 221-224.
- J. Wang, L. Wan, J. Chen, J. Yan: Anisotropy of synthetic diamond in catalytic etching using iron powder, Applied Surface Science, 346 (2015) 388-393.
- Q. Wang, Z. Wu, F. Zhou, H. Huang, K. Niitsu, J. Yan: Evaluation of crack resistance of CrSiCN coatings as a function of Si concentration via nanoindentation, Surface and Coatings Technology, 272 (2015) 239-245.
- Z. Wu, F. Zhou, Q. Wang, Z. Zhou, J. Yan, L. K. Y. Li: Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication, Applied Surface Science, 355 (2015) 516-530.
- Q. Wang, F. Zhou, C. Wang, M. F. Yuen, M. Wang, T. Qian, M. Matsumoto, J. Yan: Comparison of tribological and electrochemical properties of TiN, CrN, TiAlN and a-C:H coatings in simulated body fluid, Materials Chemistry and Physics, (2015) 74-81.
- H. Huang and J. Yan: New insights into phase transformations in single crystal silicon by controlled cyclic nanoindentation, Scripta Materialia, 102 (2015) 35-38.
- Q. Wang, F. Zhou, S. Gao, Z. Zhou, L. K. Y. Li, J. Yan: Effect of counterparts on the tribological properties of TiCN coatings with low carbon concentration in water lubrication, Wear, 328–329 (2015) 356-362.
- S. Azami, H. Kudo, Y. Mizumoto, T. Tanabe, J. Yan, Y. Kakinuma: Experimental study of crystal anisotropy based on ultra-precision cylindrical turning of single-crystal calcium fluoride, Precision Engineering, 40 (2015) 172-181.
- Q. Wang, F. Zhou, Z. Zhou, L. K. Y. Li, J. Yan: Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid, Surface and Coatings Technology, 265 (2015) 16-23.
- Y. Iwabuchi and J. Yan: Laser sintering of silicon powder and carbon nanofibers for porous composite thick films, Applied Physics Express, 8 (2015) 026501.
- 城所貴博,閻 紀旺:高精度プレス焼結によるシリコン・炭素複合厚膜の創製,砥粒加工学会誌,59, 1 (2015) 23-26.
- T. Zhou, J. Yan, Z. Liang, X. Wang, R. Kobayashi, T. Kuriyagawa: Development of polycrystalline Ni–P mold by heat treatment for glass microgroove forming; Precision Engineering, 39, 1 (2015) 25-30.
- (総説)炭素拡散を利用したダイヤモンドの微細加工; 閻 紀旺; NEW DIAMOND; 31, 4 (2015) 11-14.
- (総説)光学結晶材料の超精密切削加工および表面品位計測; 閻 紀旺 ; 光技術コンタクト; 53, 11 (2015) 27-35.
- (総説)超硬合金および反応焼結SiC の延性モード切削; 閻 紀旺 ; 砥粒加工学会誌,59, 8 (2015) 6-9.
2014
- (受賞)新津敬一郎:日本機械学会生産加工・工作機械部門優秀講演論文表彰 2014/11/15.
- (受賞)渡邉和憲:American Society for Precision Engineering (ASPE) Student Scholarship 2014, 2014/11/11.
- (受賞)城所貴博:砥粒加工学会平成26年度優秀講演賞, 2014/10/24.
- (受賞)岩渕友樹:The 15th International Conference on Precision Engineering (ICPE2014) Best Paper Award, 2014/7/24.
- (受賞)渡邉和憲:工作機械技術振興財団第35 次工作機械技術振興賞(奨励賞), 2014/6/23.
- (受賞)村田雄一郎:スマートプロセス学会論文賞, 2014/05/19.
- (受賞)新津敬一郎:慶應義塾大学理工学部機械工学科卒業研究優秀発表賞, 2014/3/22.
- (受賞)渡邉和憲:慶應義塾大学理工学部機械工学科鬼頭賞, 2014/3/22.
- (受賞)岡田航雅:2014年度砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2014/3/7.
- (受賞)松本光弘:2014年度砥粒加工学会卒業研究発表会ポスタープレゼンテーション賞, 2014/3/7.
- 単結晶シリコンの超精密切削における元素ドーピングの影響; 楠 雄策,閻 紀旺; 砥粒加工学会誌, Vol.58/No.11/P. 699-704 (2014).
- Electrochemical performance of TiCN coatings with low carbon concentration in simulated body fluid; Q. Wang, F. Zhou, Z. Zhou, L.K.Y. Li, J. Yan; Surface and Coatings Technology, Vol.253/P.199-204 (2014).
- Micro-electrical discharge machining of polycrystalline diamond using rotary cupronickel electrode; J. Yan, K. Watanabe, T. Aoyama; CIRP Annals – Manufacturing Technology ; Vol.63/No.1/P.209-212 (2014).
- Nanoindentation of polysilicon and single crystal silicon: Molecular dynamics simulation and experimental validation; S. Goel, N. Faisal, X. Luo, J. Yan, A. Agrawal; Journal of Physics D: Applied Physics, Vol.47/275304/P. 1-14 (2014).
- Incipient plasticity in 4H-SiC during quasistatic nanoindentation; S. Goel, J. Yan, X. Luo, A. Agrawal; Journal of the Mechanical Behavior of Biomedical Materials
, Vol.34/P.330-337 (2014). - Fabrication of Deep Micro Holes in Reaction-Bonded SiC by Ultrasonic Cavitation Assisted Micro EDM ; P. J. Liew, J. Yan, T. Kuriyagawa ; International Journal of Machine Tools and Manufacture ; Vol.76/P.13-20 (2014).
- (総説)レーザプロセッシングを用いた機能表面創成; 閻 紀旺; レーザ協会誌; Vol.39/No.2/37-40 (2014).
- (総説)次世代産業に向けたこれからの精密加工技術; 閻 紀旺 ; 型技術 ; Vol.29/No.5/018-021 (2014).
- (総説)半導体および光学結晶の超精密切削加工技術; 閻 紀旺 ; 機械技術 ; Vol.62/No.1/P.31-35 (2014).